Researchers from the Pohang University of Science and Technology (POSTECH), South Korea, have published research in Virtual and Physical Prototyping on a Laser Powder Bed Fusion technique that engineers ... Read more »
Researchers from South Korean organisations Pohang University of Science and Technology (POSTECH), Korea Institute of Materials Science (KIMS), and the Hyundai Motor Group, and the Japanese University of Osaka ... Read more »
Rochester Institute of Technology (RIT), New York, USA, has reported on doctoral research by Valeria Marin Montealegre exploring the use of zinc-based materials in Additive Manufacturing for facial bone implants. ... Read more »
A European Space Agency (ESA) Discovery project, led by the Danish Technological Institute (DTI), is currently investigating how lunar regolith can be converted into materials for Additive Manufacturing of electronic ... Read more »
Toyota Kirloskar Motor (TKM), an Indian joint venture between Toyota Motor Corporation and the Kirloskar Group for the manufacture and sale of Toyota cars in India, has signed an MoU with Bengaluru-based Wipro 3D ... Read more »
Researchers from the UK’s University of Wolverhampton and Diamond Hard Surfaces Ltd, based in Towcester, as well as the College of Engineering, Prince Mohammad Bin Fahd University, Al-Khobar, Saudi Arabia ... Read more »
Researchers at the wbk Institute of Production Science at Karlsruhe Institute of Technology (KIT), Germany, have developed a material system under the Ceramic Multi-Material Additive Manufacturing (CeraMMAM) ... Read more »
Caracol, headquartered in Barlassina, Italy, has announced a strategic partnership with CNC Robotics, located in Bootle, UK, debuting at MACH 2026. A key element of the partnership is the capability to assemble ... Read more »
The European Powder Metallurgy Association (EPMA) has issued a reminder that entry to this year’s Thesis Competition will close April 22, 2026. The competition is open to graduates from European universities ... Read more »
The UK’s Loughborough University is advancing its research into Electron Beam Powder Bed Fusion (PBF-EB). Using Freemelt’s open architecture, the team led by Professor Moataz Attallah has full control over process ... Read more »
Argonne National Laboratory, based in Lemont, Illinois, USA, has submitted the first draft of an American Society of Mechanical Engineers (ASME) Code Case to enable the use of Laser Beam Powder Bed Fusion (PBF-LB) ... Read more »
Researchers from Purdue University, West Lafayette, Indiana, USA, have published research in Advanced Manufacturing focused on the characterisation of powders for Additive Manufacturing in space. ... Read more »
Researchers from Hiroshima University, Japan, have published a study titled ‘Effect of the hot-wire laser irradiation method and a Ni-based alloy middle layer on mechanical properties and microstructure in Additive ... Read more »
Researchers from University College London, Brunel University London, Research Complex at Harwell, University of Bristol, Diamond Light Source, and Oxford Brookes University have partnered to publish research ... Read more »
America Makes, Youngstown, Ohio, USA, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced the winners of their Corrosion of Additive – Tested at Component Scale ... Read more »
The Fraunhofer Institute for Laser Technology ILT (Fraunhofer ILT), located in Aachen, Germany, and Cailabs, based in Rennes, France, are entering a development partnership to advance wire-based laser material ... Read more »
Japanese researchers from Hiroshima University and Mitsubishi Materials Hardmetal Corporation have published research in the International Journal of Refractory Metals and Hard Materials focused on the use of laser-based ... Read more »
A team led by the University of Massachusetts Amherst, in collaboration with researchers from the Massachusetts Institute of Technology (MIT) Department of Mechanical Engineering (MechE), has demonstrated ... Read more »
DMG MORI Federal Services has been selected by the US Department of Energy (DOE) for a $400,000 award under the High-Performance Computing for Manufacturing (HPC4Mfg) programme, part of DOE’s High-Performance ... Read more »
Japanese researchers from Hiroshima University, Higashi-Hiroshima, and Mitsubishi Materials Hardmetal Corporation, Gifu, have reported the successful Additive Manufacturing of tungsten carbide–cobalt (WC-Co) ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online