In a new study published in Advanced Materials, researchers from Lawrence Livermore National Laboratory (LLNL) and collaborators from several universities have demonstrated a method to guide the settling ... Read more »
EPRI, Palo Alto, California, USA, has received Best Paper recognition from ASME’s Manufacturing, Materials and Metallurgy Committee for the paper ‘Learnings in the Qualification of ABD 900AM for Turbine ... Read more »
China has announced that it successfully conducted its first metal Additive Manufacturing in space in January. The experiment was performed aboard a recoverable payload developed by the Institute of Mechanics ... Read more »
ASTM International has been awarded a new project under the NATO Accelerating Interoperability and Standardization (AIS) Fund titled ‘Unmanned Surface Vehicles (USV) Standardization: Current Status and Future ... Read more »
The European Powder Metallurgy Association (EPMA) is now open to submissions for its 2026 Powder Metallurgy Thesis Competition. The competition aims to promote Powder Metallurgy among young scientists ... Read more »
America Makes, Youngstown, Ohio, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced two project calls worth a combined $8 million in funding. The first project call ... Read more »
Researchers from Guangxi Medical University Cancer Hospital, Nanning, China, have developed a surgical technique combining additively manufactured metal prostheses and mesh patches for the treatment of distal ... Read more »
A doctoral student at Chalmers University of Technology, Gothenburg, Sweden, is addressing the challenge of additively manufacturing high-performance metals for use in extreme environments. In his paper ... Read more »
Researchers from Jiangsu University, Zhenjiang, China, have published a paper in the International Journal of Extreme Manufacturing focused on work to balance strength and ductility in additively manufactured high-entropy ... Read more »
Under an EU-funded research project, the Danish Technological Institute (DTI), located in Taastrup, and Heatflow, based in Hobro, Denmark, together with Fraunhofer IWU, Germany, and Open Engineering, Belgium ... Read more »
Two studies, led by Rajiv Malhotra, Associate Professor, Department of Mechanical and Aerospace Engineering, researchers from Rutgers School of Engineering, Piscataway, New Jersey, USA, have illustrated ... Read more »
America Makes, Youngstown, Ohio, USA, has detailed its undertakings across 2025, including its nearly $14 million investment in key projects and advancing standards and qualifications. ... Read more »
Altair, based in Troy, Michigan, USA, has announced updates to its HyperWorks software. HyperWorks 2026 targets accelerated development and improved product performance via computer-aided engineering ... Read more »
America Makes, Youngstown, Ohio, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced the winners of a recent project call funded by the Office of the Under ... Read more »
Motion Imager, together with the Mechanics of Materials (MoM) and Processing and Performance (P&P) sections of the Mechanical Engineering department at Eindhoven University of Technology (TU/e), ... Read more »
The Fraunhofer Institute for Laser Technology ILT (Fraunhofer ILT), located in Aachen, Germany, and Etxetar, based in Elgoibar, Spain, have signed a letter of intent, focusing on the further development and industrialisation ... Read more »
Saab AB, headquartered in Linköping, Sweden, reports it has worked with Divergent Technologies, Torrance, California, USA, to design and additively manufacture a software-defined aircraft fuselage. The fuselage ... Read more »
Researchers from the US Department of Energy’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory (ORNL), Tennessee, have announced the development of Future Foundries, a new Additive ... Read more »
The Metal Powder Industries Federation (MPIF) has announced that the winner of its 2025 Excellence in Metallography Award is ‘The Effect of Heat Treatment on the Microstructure of Additively Manufactured Abrasion ... Read more »
ASTM International’s Additive Manufacturing Center of Excellence (AM CoE) and Additive Center B.V., Eindhoven, Netherlands, have announced a strategic partnership to accelerate Additive Manufacturing certification ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online