Italian researchers from Politecnico di Bari, IMAST (High Tech District on Polymers and Composite Materials Engineering), Sòphia High Tech and CNR-IPCB, National Research Council – Institute of ... Read more »
Researchers at RMIT University, in Melbourne, Australia, have developed a buoyant titanium structure produced using laser beam Powder Bed Fusion (PBF-LB) that is intended to retain buoyancy even when damaged. ... Read more »
Researchers at Empa, the Swiss Federal Laboratories for Materials Science and Technology, based in Dübendorf, Switzerland, are investigating how steel components can be repaired or redesigned using metal AM ... Read more »
Researchers from Universidad Industrial de Santander (UIS) and Universidad del Norte, both in Colombia, and Advanced Aeronautics Manufacturing Centre CFAA, Spain, have published a study in Journal of Manufacturing ... Read more »
Researchers from Colorado School of Mines, GAC R&D Center Silicon Valley and Georgia Institute of Technology have published a study in JOM investigating the use of vision-language models (VLMs) for ... Read more »
ETH Zurich researchers develop a policy-optimised closed-loop PBF-LB control strategy to stabilise temperature and improve process robustness. ... Read more »
Continuum Powders, Houston, Texas, USA, and Additive Manufacturing Research (AM Research), New York, New York, have published a new white paper, examining how material availability is emerging as ... Read more »
Researchers from Università Politecnica Delle Marche, Ancona, Italy, have published a study in the Journal of Materials Research investigating the short-term creep behaviour of AISI 316L stainless steel produced ... Read more »
Researchers from the University of Sheffield, UK, have published a study in the Journal of Manufacturing Processes demonstrating the Binder Jetting of 316L stainless steel using a low-saturation aqueous PVA binder ... Read more »
Researchers from the Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany, have developed a model-based calculation chain for predicting the effects of mechanical surface post- ... Read more »
Phase3D, located in Chicago, Illinois, USA, and Rowan University’s Digital Engineering Hub (DEHub), based in Glassboro, New Jersey, have announced a partnership to advance data-driven metal Additive ... Read more »
The European Powder Metallurgy Association (EPMA) has announced the Keynote Paper Award winners ahead of Euro PM2026, taking place October 11-14, 2026, in Budapest, Hungary. The awardees have been selected ... Read more »
Researchers at the University of Illinois Urbana-Champaign, USA, and the Technical University of Denmark (DTU) have used metal Additive Manufacturing to fabricate what they describe as the first ... Read more »
Scientists at The University of Manchester, England, UK, have demonstrated how careful control of processing temperatures in Molten Metal Deposition (MMD) technology from ValCUN, Ghent, Belgium, ... Read more »
Researchers at the University of California Santa Barbara (UCSB), USA, have developed an experimental–computational framework that reconstructs the three-dimensional thermal history of a ... Read more »
The European Space Agency (ESA) has reported the latest progress of its Metal 3D Printer Technology Demonstrator aboard the International Space Station (ISS), where the machine has now produced its ... Read more »
PanOptimization, based in State College, Pennsylvania, USA, has published research, supported by the US Air Force Research Laboratory (AFRL), in The International Journal of Advanced Manufacturing Technology ... Read more »
The National Center for Additive Manufacturing Excellence (NCAME), Auburn University, Alabama, USA, has partnered with 6K, based in North Andover, Massachusetts, to investigate the mechanical performance ... Read more »
Framatome officially opened the Amiral Bernard-Antoine Morio de l’Isle Additive Manufacturing Centre in Romans-sur-Isère, France, on July 2. Less than a year after laying the first stone, the 6,000 m² facility, backed ... Read more »
Researchers from Texas A&M University, College Station, Texas, USA, have published a paper in Nature Communications. The paper, titled ‘3D nanoprinting of metals by spatiotemporally confined hot electrons via ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online