For Colnago, one of cycling’s most prestigious brands, the Steelnovo represents a showcase project – a modern interpretation of what the ‘perfect’ road bike might look like. Instead of the titanium more commonly used for additively manufactured frame lugs, the company worked with Additiva Srl and ATLIX to develop complex 316L steel nodes combined with Columbus steel tubing. Metal Additive Manufacturing magazine’s Nick Williams explores how the project demonstrates the potential of AM to modernise traditional materials while preserving the distinctive ride quality associated with steel frames.
... Read more »
Wire-based Directed Energy Deposition (DED) is becoming one of the most practical routes for manufacturing large metal components, offering higher deposition rates and better material utilisation than many powder-based Additive Manufacturing processes. Yet wire-based DED is not a single technology category. Laser, electron beam, and arc-based systems each present different trade-offs in precision, productivity, thermal control, and industrial practicality. In this article, WAAM3D examines how these process families compare and why newer dual-wire approaches are expanding the industrial potential of large-scale metal AM.
... Read more »
Additive Manufacturing Strategies 2026 offered a revealing snapshot of an industry entering a more sober phase. The discussions in New York were less about disruption and more about execution: how capital cycles shape machine sales, why software and ecosystems may determine who scales, and where polymer and metal Additive Manufacturing follow very different economic paths. If there was a common thread, it was that AM’s future will depend less on technology claims and more on solving specific industrial problems. Joseph Kowen reports.
... Read more »
Although Haynes® 282® offers an excellent balance of weldability, creep strength and high-temperature stability, processing via metal Additive Manufacturing presents challenges. Steep thermal gradients during deposition can promote hot cracking and porosity, narrowing the process window. In this article, Spain’s Etxetar explores what is required to industrialise laser and powder-based Directed Energy Deposition (DED) of this alloy. It shows how adoption depends on aligning feedstock quality, deposition strategy and hardware configuration, using IG-series heads to demonstrate how nozzle design, monitoring and toolpaths are tailored to application requirements.
... Read more »
In high-temperature propulsion applications, it is materials that set the boundaries of what is possible. Additive Manufacturing may have changed how we build components, but it hasn’t necessarily changed what extremes these components can endure in service. NASA’s GRX-810 oxide-dispersion-strengthened superalloy tackles that constraint head-on: a high-temperature alloy designed, unlike legacy alloys, specifically for AM. Here, NASA’s Tim Smith and Paul Gradl explain how GRX-810 was developed, what has been demonstrated to date, and the pathway to commercial success.
... Read more »
The inaugural Vicenza Symposium, which took place from September 2-4, 2025, brought jewellery manufacturers, researchers and industry leaders to Italy’s ‘Capital of Gold’ for three days of technical exchange in the UNESCO-listed Basilica Palladiana. Metal Additive Manufacturing featured prominently, from a striking Bulgari case study to research on hard-to-build precious metal alloys and emerging work on the Binder Jetting of gold. In this report, Michela Ferraro presents insights from three selected presentations, based on in-depth conversations with the authors.
... Read more »
Additive Manufacturing’s promise isn’t in ‘printing everything’ – it is in knowing exactly where to apply the technology. At Domin, a UK manufacturer of motion control products, CEO Marcus Pont’s team uses the technology sparingly yet decisively, exploiting AM-enabled innovations and its potential to deliver complex internal geometries. The twist? A focus on steel. Too often overlooked for titanium or aluminium, maraging steel underpins robust, precise, and efficient hydraulic products. Martin McMahon explores the disciplined use of AM as powerful tool: performance first, costs controlled, and selectively delivering impact at scale.
... Read more »
The notion of a digital warehouse encapsulates the potential of cloud-based digital twins, produced locally and on demand by Additive Manufacturing. This approach promises increased efficiency, sustainability, and resilience against trade barriers and logistical disruptions. In the Winter 2021 edition of Metal AM, an initial survey established a baseline of practice in digital spare parts. In this article, Joseph Kowen revisits that foundation, analysing subsequent developments, persistent challenges, and the evolving industrial and geopolitical factors influencing the adoption of additively manufactured spare parts.
... Read more »
As space missions push towards 100 kW nuclear fission systems and megawatt-class propulsion, thermal management is becoming a critical bottleneck. Backed by NASA programmes and working with 3D Systems, researchers at Penn State and Arizona State universities are leveraging metal AM to develop titanium radiator panels with integral heat pipes and NiTi components for self-deploying systems. Tests under simulated orbital conditions showed more than 50% performance gains, proving AM’s potential to cut mass and boost efficiency in spacecraft cooling.
... Read more »
At the 21st Plansee Seminar, it became clear that Additive Manufacturing has firmly established itself within the refractory metals and hard materials community. Presentations covered the full process spectrum – from powder handling and melt pool modelling to in-situ control and post-processing – with results directly relevant to industrial adoption. As Bernard North reports, work on molybdenum, tungsten, rhenium and niobium highlighted practical paths toward dense, reliable components for energy, aerospace and nuclear fusion technologies, marking a decisive step from laboratory feasibility to engineered applications.
... Read more »
Wire Electron Beam Directed Energy Deposition (DED-EB/W) is gaining attention as a highly efficient metal Additive Manufacturing process. Offering high deposition rates, minimal thermal distortion, and excellent energy efficiency, the process addresses two major industry challenges: productivity and resource use. As sustainability regulations tighten and demand grows for large-scale, cost-effective components, DED-EB/W presents a compelling alternative to powder-based AM systems. In this article, Bernd Baufeld and Alejandro Zamorano Reichold of Pro-beam Additive GmbH review the technology and examine its technical foundations and potential for industrial-scale adoption.
... Read more »
ValCUN’s Molten Metal Deposition (MMD) technology is a wire-based Additive Manufacturing solution designed to improve deployability and cost efficiency in aluminium part production. While applicable across various industrial sectors, it is also being explored for defence applications due to its potential for in-field manufacturing. With its inherent robustness, and the elimination of powder handling, MMD offers a deployable, user-friendly solution for producing critical parts in remote or demanding environments, as well as for seamless integration into industrial production settings.
... Read more »
Hydraulic systems are important across many industries, providing high power density in compact, efficient packages. However, conventional subtractive manufacturing methods restrict design and performance. Additive Manufacturing offers a solution, enabling the production of complex geometries that enhance flow dynamics whilst minimising material use. In this article, Valeria Tirelli, CEO of Aidro Srl, considers how AM is reshaping hydraulic component design and production, offering new possibilities for enhanced performance, sustainability, and application-specific customisation.
... Read more »
Türkiye’s Vision 2025 roadmap places Additive Manufacturing at the core of its aerospace innovation strategy, with a view to driving innovation in aircraft production and beyond. This article explores Türkiye’s efforts to integrate AM technologies, driven by the country’s leading aerospace producer, Turkish Aerospace Industries (TAI), and powered by the vital contributions of organisations such as EKTAM and ALUTEAM. With academia-industry collaboration, international partnerships, and advances in materials and processes, Ümit Aytar reports on how Türkiye is shaping a robust AM ecosystem.
... Read more »
Aluminium has emerged as a pivotal material in Additive Manufacturing, revolutionising industries such as aerospace, automotive, and beyond. Overcoming early processing challenges, advances in AM machines and alloy designs are unlocking aluminium’s potential. Today, its lightweight, high strength and thermal properties, combined with advances in powder production and sustainability efforts, are driving its rapid adoption. As Dr Martin McMahon explains, with growing applications and ongoing materials development, aluminium is poised to play a transformative role in shaping the future of AM technologies.
... Read more »
The global semiconductor supply chain is under immense strain as a result of geopolitical and economic factors, putting significant pressure on Semiconductor Capital Equipment (SCE) manufacturers. In this article, Emily Godsey interviews Texas A&M’s Prof Alaa Elwany and Jiahui Ye, and Veeco Instruments Inc’s Dr Ahmed El Desouky, to explore the benefits of metal Additive Manufacturing technologies for semiconductor manufacturing and the SCE supply chain.
... Read more »
The metal Additive Manufacturing industry has significantly increased machine productivity in recent years. In the case of Laser Beam Powder Bed Fusion
(PBF-LB), efforts have primarily focused on what happens inside the build chamber. Here, Sebastian Becker, Head of Product Management Metal, EOS GmbH, reports on how, with Grenzebach Maschinenbau GmbH and Volkmann GmbH, the company is looking outside of the build chamber. Thanks to automation, machine time utilisation can be taken from an estimated 60% to nearer 90% through rapid automated build box exchange and fully automated powder removal and recycling.
... Read more »
Sustainability has risen to the top of the global manufacturing agenda. Whilst metal AM has long been considered a green technology because of its net-shape capabilities, it is far from being a process absent of environmental impact. Here, Martin McMahon explores how global efforts are being made to improve this through the use of more sustainable metal powders, combined with a greater focus on powder reuse and recycling. Inextricably linked to this are, of course, economic gains and, in terms of supply chain, national security benefits.
... Read more »
The growing use of titanium Additive Manufacturing for the production of medical implants is a major success story for the industry. With this growth, however, come vast volumes of process data which need to be monitored to ensure compliance with tight regulatory requirements. Here, Peter Lindecke, amsight GmbH, explains how holistic analysis software can be used to monitor the impact of powder reuse strategies in Electron Beam Powder Fusion to ensure the best possible outcomes.
... Read more »
The future of Additive Manufacturing lies in part production at scale. Innovation must, therefore, focus on how to reduce part cost and improve performance. Unlike other manufacturing processes, weight is time in AM – and time is money; raw material costs take a back seat when it comes to overall part cost. Here, Jonathan Meyer (APWORKS) and John Barnes (Metal Powder Works/The Barnes Global Advisors) explore the case for scandium-based aluminium alloys for AM from both technical and economic perspectives.
... Read more »
Join 40,000+ other AM professionals – follow us online