Altair launches consortium to support Material Data Center
Altair, Troy, Michigan, USA, has announced the launch of the Altair® Material Data Center™ consortium, designed to help make its Altair Material Data Center (AMDC) ... Read more »
News on metal Additive Manufacturing research
Morf3D’s Applied Digital Manufacturing Center partners with Starburst Aerospace
Morf3D, Inc, a Nikon subsidiary headquartered in El Segundo, California, USA, has announced that Starburst Aerospace has committed to a technology development partnership ... Read more »
Texas A&M publishes research on cooling properties for non-porous AM parts
A new study by Texas A&M University researchers, and published in the journal Additive Manufacturing, has further refined the process of creating superior metal parts using Laser Beam Powder Bed Fusion ... Read more »
LLNL explores laser beam shaping to improve metal AM
Researchers from Lawrence Livermore National Laboratory (LLNL), California, USA, have been working to address issues such as defects and poor mechanical performance that can arise during ... Read more »
AddUp provides FormUp 350 to Ohio State University
AddUp, Inc, the American subsidiary of France’s AddUp SAS, and The Ohio State University have announced the installation of a FormUp 350 Laser Beam Powder Bed Fusion (PBF-LB) machine ... Read more »
3DQue successfully tests automation technology for reduced-cost AM
3DQue Systems Inc, Vancouver, British Columbia, Canada, has announced the successful testing of Quinly automation for metal Additive Manufacturing. Quinly, a hands-free virtual ... Read more »
Eplus3D and Delta Racing develop AM wheel carrier for Formula Student race series
Eplus3D, Hangzhou, China, has showcased its Additive Manufacturing technology when the company collaborated with the Delta Racing Team of Mannheim University of Applied Sciences ... Read more »
Solar Atmospheres retrofits vacuum furnace for MIM and sinter-based AM
Solar Atmospheres of Western PA, Hermitage, Pennsylvania, USA, reports it has successfully retrofitted a pre-owned vacuum furnace with a new hot zone and pumping technology to enable the furnace ... Read more »
2021 International Symposium on Innovation in Materials Processing to take place in Korea
The third International Symposium on Innovation in Materials Processing (ISIMP 2021) is scheduled take place in Jeju, South Korea, October 26-29, 2021. Organised by the Korean Powder Metallurgy ... Read more »
Binder Jetting status update, China’s largest MIM company: All in the latest PIM International
The September 2021 issue of PIM International (Vol. 15 No. 3), the magazine for MIM, CIM and sinter-based Additive Manufacturing, is available to read for free online or download in pdf format ... Read more »
SSI and ExOne to accelerate volume production in metal Binder Jetting
SSI Sintered Specialties, headquartered in Janesville, Wisconsin, USA, has announced its purchase of an X1 160Pro and InnoventPro 3L metal Binder Jetting (BJT) Additive Manufacturing machines ... Read more »
AMTC Advanced Manufacturing Technology Conference releases programme
The fourth global AM conference of the Advanced Manufacturing Technology Conference (AMTC, formerly MTC) is taking place from October 12-14, 2021, in Aachen, Germany. For location capacity ... Read more »
EPMA Club Projects on combination of AM and HIP open to industry
The European Powder Metallurgy Association (EPMA) in partnership with RWTH Aachen University, Germany, is in the preliminary stages of establishing two new Club Projects looking at the combination ... Read more »
AMGTA establishes fund for research in Binder Jetting
The Additive Manufacturer Green Trade Association (AMGTA) has established the Sustainability of Additive Manufacturing Research Fund, a $100,000 fund which will support research ... Read more »
Höganäs joins Connactive to develop new eDrive concepts based on metal powders
Sweden’s Höganäs AB reports it has joined the Connactive project to help develop new electric drive concepts based on the use of metal powders. The Connactive project was established in 2019 ... Read more »
Schunk focusses on high-tech materials at new Innovation Centre
The Schunk Group, headquartered in Heuchelheim, Germany has opened a new Innovation Centre in Heuchelheim. The facility, in which the company has already invested €20 million, hosts state-of-the-art ... Read more »
Accenture and 3YOURMIND partner on bringing distributed manufacturing to factory floor
Accenture, Dublin, Ireland, and 3YOURMIND, Berlin, Germany, have announced a partnership to implement a distributed manufacturing platform through machine connectivity at the Accenture ... Read more »
Additive Manufacturing research facility orders Quintus HIP
Quintus Technologies, Västerås, Sweden, reports that a Quintus QIH 48 M Hot Isostatic Press (HIP) will be installed at the additive research facility at the new Oregon Manufacturing Innovation ... Read more »
Linde and EOS leverage ADDvance O2 precision technology for aluminium study
Linde, a global industrial gas specialist headquartered in Guildford, Surrey, UK, and EOS GmbH, headquartered in Krailling, Germany, partnered to conduct a study into the influence of oxygen ... Read more »
Impact Innovations demonstrates Cold Spray AM for rocket engines
Impact Innovations, Rattenkirchen, Germany, has set up a collaborative project with Airborne Engineering (AEL), a UK company specialising in propulsion system design and testing ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online