Authentise, based in Philadelphia, Pennsylvania, USA, has been chosen as one of ten projects selected for funding by the US Department of Energy in collaboration with the Cybersecurity Manufacturing Innovation ... Read more »
Incus GmbH, Vienna, Austria, has partnered with the NanoProbe Group at Yale University to conduct collaborative research on auxetic structures. Led by Jacob Eldred, an undergraduate research assistant at Yale, and the NanoProbe Group, which is known for its work in ... Read more »
AddUp’s Tooling Competence Centre, located within the WBA Tooling Academy in Aachen, Germany, has announced the launch of the 2024 Additive Manufacturing for Injection Molding project focused on developing ... Read more »
The PM-24 International Conference on Powder Metallurgy and Particulate Materials 2024, organised by the Powder Metallurgy Association of India (PMAI), is scheduled to take place February 25-28, 2024, at the Hyatt Regency ... Read more »
The European Powder Metallurgy Association (EPMA) has opened submissions for its annual Powder Metallurgy Thesis Competition. The competition aims to promote Powder Metallurgy among young scientists ... Read more »
The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes, the National Additive Manufacturing Innovation Institute, have announced the winners of the $5.75 million Proliferation ... Read more »
Laboratory Testing Inc. (LTI), Hatfield, Pennsylvania, USA, has invested over $3 million to install sixteen new fatigue testing frames at its facility, bringing the total it now has in the lab to fifty-two. This expansion ... Read more »
SME has announced that nominations are now open for four Additive Manufacturing awards. The association is also inviting nominations for its AM Pitchfest, which is scheduled to take place at RAPID + TCT 2024 ... Read more »
NASA first reported the development of its GRX-810 powder in 2022, an oxide dispersion strengthened (ODS) alloy specifically for use in extreme temperatures. This Ni-Co-Cr based alloy was designed for aerospace ... Read more »
Researchers at the Laboratory of Thermomechanical Metallurgy (LMTM) at EPFL’s School of Engineering, Écublens, Switzerland, have reported that they have found it possible to detect defects real-time based ... Read more »
The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes have announced the winners of the $1.2 million Environmental Additive Research for Tomorrow’s Habitat ... Read more »
Auburn University, Alabama, USA, has been awarded a $50 million grant for a three-year project with the US Army. The grant represents the single largest prime research contract ever awarded to Auburn University ... Read more »
Microtrac MRB, a manufacturer of instruments for particle characterisation, and part of Verder Scientific, a division of Verder Group headquartered in Haan, Germany, has entered into a strategic partnership with Mark & Wedell ... Read more »
Oxford Instruments plc, a materials analysis solutions provider headquartered in Abingdon, Oxfordshire, UK, has established the Oxford Instruments Innovation Centre at the company’s High Wycombe site ... Read more »
The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes, the National Additive Manufacturing Innovation Institute, have announced the winners of the $1.2 million ... Read more »
VBN Components, Uppsala, Sweden, has announced it is supporting a new industrial PhD collaboration. The company maintains a longstanding collaboration with the Ångström Laboratory at Uppsala University ... Read more »
Velo3D, Inc, based in Campbell, California, USA, has announced its Sapphire family of metal Additive Manufacturing machines are the first to achieve the US Department of Defense’s Green-level ... Read more »
Wohlers Associates, powered by ASTM International, based in Fort Collins, Colorado, USA, has been chosen to lead a project for the US Air Force (USAF) that focuses on techno-economic analysis in Powder Bed Fusion ... Read more »
The University of Waterloo, based in Ontario, Canada, has opened the country’s largest metal Additive Manufacturing facility in Kitchener. This facility, which began as a small room on the University of Waterloo ... Read more »
The University of Arizona’s microcampus at Kozybayev University in Kazakhstan has received its first industrial metal Additive Manufacturing machine, the HBD 350. Manufactured by China’s Guangdong ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online