America Makes, Youngstown, Ohio, USA; the National Additive Manufacturing Innovation Institute, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced the winners of the $2.9 million ... Read more »
Incus GmbH, based in Vienna, Austria, has been awarded the B&C-Gruppe’s Houska Prize for the Research & Development in SMEs category, accompanied by a financial grant of €150,000 for Dr Gerald ... Read more »
A team of students from Rice University, Houston, Texas, USA, have developed a cold spray metal Additive Manufacturing device that relies on pressure and velocity, rather than temperature, to create a metal part ... Read more »
In a paper titled ‘Laser Powder Bed Fusion Processing of Low Cost CoCrFeNiMoxNby High Entropy Alloys with Promising High-Temperature Properties via In Situ Alloying Commercial Powders,’ authors S Venkatesh Kumaran ... Read more »
The Additive Manufacturer Green Trade Association (AMGTA), a global advocacy group focused on promoting sustainable Additive Manufacturing industry practices, has announced the preliminary results of a research ... Read more »
The qualification of materials used in Additive Manufacturing is a thorough process, explains NSL Analytical Services, Inc., based in Cleveland, Ohio. The process requires many tests to be completed in order to set ... Read more »
Freemelt AB, based in Mölndal, Sweden, has received the first eMELT-iD order in the Americas from a university aiming to accelerate Additive Manufacturing as a manufacturing technology for serial production ... Read more »
Rishi Pillai and his research team from the US Department of Energy’s (DOE) Oak Ridge National Laboratory (ORNL) in Tennessee, USA, will receive a Best Paper award from the American Society of Mechanical ... Read more »
Researchers at Nanyang Technological University and the National University of Singapore have published a paper investigating microstructure control in the metal Additive Manufacturing process ... Read more »
Additive Industries, headquartered in Eindhoven, the Netherlands, has announced that a MetalFABG2 Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing machine will be installed later this year ... Read more »
Researchers from ETH Zurich, Switzerland, and Aerosint, Herstal, Belgium, recently published a paper in Materials & Design focusing on the defect-free Additive Manufacturing of CuCrZr-316L steel multi-material structures ... Read more »
Relativity Space, based in Long Beach, California, USA, has secured an $8.7 million contract with the US Air Force Research Laboratory (AFRL) to explore real-time flaw detection in Additive Manufacturing ... Read more »
Ames National Laboratory, Iowa, USA, will partner with eight other DOE National Laboratories to support the Critical Materials Supply Chain Research Facility recently announced by the US Department of Energy’s (DOE) ... Read more »
The Tantalum-Niobium International Study Center (TIC) is celebrating its 50th year as a trade association serving the tantalum and niobium industries. Over this time, leaders in these industries have met at the TIC ... Read more »
America Makes, Youngstown, Ohio, USA, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced an open project call funded by the US Office of the Secretary of Defense Manufacturing ... Read more »
The University of Wolverhampton, UK and EOS GmbH, Krailling, and AMCM GmbH, Starnberg, Germany, have announced that they will be launching a new UK Centre of Excellence for Additive Manufacturing ... Read more »
EnerAM – a group project between Atomising Systems Limited (ASL), Laser Additive Solutions (LAS), Nuclear Advanced Manufacturing Research Centre (NAMRC), Hybird Technologies ltd and Brunel University London ... Read more »
Researchers at the Fraunhofer Institute for Laser Technology ILT are developing innovative manufacturing technologies for rocket components in the ENLIGHTEN project. The researchers will be presenting their ... Read more »
A team of fifty undergraduate students on Purdue University’s Active Controls team have used Additive Manufacturing to advance vertical take-off and vertical-landing (VTVL) technology. The Purdue Space ... Read more »
The Technical University of Braunschweig, Braunschweig, Germany, has reported that Linus Schmitz, a Civil Engineering graduate, received the German Steel Construction Award for his work to investigate the use ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online