A strategic collaboration, between Sweden’s Freemelt AB, Sandvik AB and Mid Sweden University, is aiming to establish Electron Beam Powder Bed Fusion (PBF-EB) Additive Manufacturing as an innovative and competitive ... Read more »
The University of Wolverhampton, UK, and materials technology company, Diamond Hard Surfaces, based in Towcester, UK, have teamed up for a collaborative research project aimed at developing advanced additively ... Read more »
Researchers from Ondokuz Mayıs University, Samsun, Türkiye, have issued an update to previously published work on adaptive slicing and the variable binder amount algorithm (VBAA) in Binder Jetting ... Read more »
A new textbook, ‘Additive Manufacturing with Metals: Design, Processes, Materials, Quality Assurance, and Applications,’ has been published by Springer. This comprehensive reference source begins with an introduction ... Read more »
San Diego State University (SDSU), California, USA, recently invested in an InnoventX Additive Manufacturing machine from Desktop Metal, Burlington, Massachusetts, for the theoretical study of the Binder Jetting ... Read more »
The European Space Agency (ESA) has announced that the first operation of its metal Additive Manufacturing machine aboard the International Space Station (ISS) took place last week. During the test, ... Read more »
AM 4 AM, a producer of advanced metal powders for Additive Manufacturing based in Foetz, Luxembourg, has announced that it has been accepted into the EIT Raw Materials Accelerator Phase 2 ... Read more »
Dimecc Ltd, Helsinki, Finland, has reported that a pressure vessel, produced in cooperation with Andritz Savonlinna Works Oy and the Finnish Additive Manufacturing Ecosystem (FAME), withstood the non-destructive ... Read more »
It has been reported that plans for a new multi-million-pound manufacturing and research centre in Darwen, Lancashire, UK, have been approved by Darwen Council’s planning and highways committee ... Read more »
A study published in the International Journal of Extreme Manufacturing proposes an alloy design approach to develop NiTiNb shape memory alloys (SMAs). The researchers from Shandong University, Jinan, China ... Read more »
Researchers at Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, USA, are reported to have used electron beam Additive Manufacturing to produce defect-free, complex tungsten parts, suitable for use in extreme ... Read more »
Quadrus Corporation, Huntsville, Alabama, USA, reports that its Quadrus Advanced Manufacturing Division (QAMD) has fabricated what is claimed to be the world’s first bimetallic rotating detonation rocket engine ... Read more »
Tekniker, a technology centre based in Eibar, Spain, and member of the Basque Research and Technology Alliance (BRTA), will showcase its Titan metal Additive Manufacturing machine at this year’s International Machine ... Read more »
Researchers at Politecnico di Torino, Turin, Italy, have published a paper in Materials & Design entitled ‘Ultraviolet–Visible-Near InfraRed spectroscopy for assessing metal powder cross-contamination: A multivariate ... Read more »
A €7.7 million EU project has been established to research alternatives to the use of rare earth elements (REE) in permanent magnet production. The MagNEO project aims to use additively manufactured REE-free AlNiCo ... Read more »
NSL Analytical Services, Cleveland, Ohio, USA, has announced the relocation of one of its two metallurgical testing laboratories to a new 1,850 m2 facility in the same city. The move approximately doubles ... Read more »
Researchers from North Carolina State University, Raleigh, USA, have demonstrated a technique that allows producers of machine parts made with metal Additive Manufacturing technologies to conduct automated ... Read more »
America Makes, Youngstown, Ohio, USA, and the National Center for Defense Manufacturing and Machining (NCDMM) have announced the winners of the $850K AM Process Pre-Qualification Open Project ... Read more »
In the study ‘A probabilistic approach to modelling ultrasonic shear wave propagation in locally anisotropic heterogeneous media’ published in the journal Waves in Random and Complex Media, researchers ... Read more »
Researchers from Carnegie Mellon University’s College of Engineering, Pittsburgh, Pennsylvania, USA, have developed a deep-learning approach that offers a novel way to capture and characterise melt pools in Laser Beam ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online