Researchers from RWTH Aachen University, Aachen, Germany, recently published an open-access paper focusing on the use of Al-Cu-Li alloys and their place in Additive Manufacturing. The high strength ... Read more »
A team from the United State’s Lawrence Livermore National Laboratory (LLNL), Stanford University and the University of Pennsylvania, has developed a novel wet chemical etching process that modifies the surface ... Read more »
The Chair for Materials Technology of the Department of Mechanical Engineering at the Technical University of Dortmund, Germany, has acquired an arc405 Wire Arc Additive Manufacturing (WAAM) ... Read more »
The Standard and Industrial Research Institute of Malaysia (SIRIM) Berhad has been awarded a grant from The Ministry of Investment, Trade and Industry (MITI) Malaysia to further study a recently developed titanium ... Read more »
The Metal Powder Industries Federation (MPIF) has selected the paper “Impact Resistance of a Free Sintering Low Alloy Steel Produced by Powder Bed Fusion Using a Laser Beam”, by Thomas F Murphy ... Read more »
HP has shared that the Digital Additive Production DAP – RWTH Aachen at RWTH Aachen University, Germany, has added a HP Metal Jet S100 Binder Jetting Additive Manufacturing machine to its facility ... Read more »
The MPIF has released the proceedings of PowderMet2024 and AMPM2024, which took place earlier this year in Pittsburgh, Pennsylvania, USA. The PDF proceedings are fully searchable and preserve the colour ... Read more »
Freemelt AB, based in Mölndal, Sweden, has received an order for a Freemelt ONE Electron Beam Powder Bed Fusion (PBF-EB) Additive Manufacturing machine from a leading research institute that targets material ... Read more »
The University of Birmingham, UK, has ordered a Freemelt ONE Electron Beam Powder Bed Fusion (PBF-EB) Additive Manufacturing machine from Freemelt, based in Mölndal, Sweden. The university is expected to use ... Read more »
The Science Technology Facilities Council’s (STFC) UK Astronomy Technology Centre (UK ATC), Edinburgh, and the UK’s National Synchrotron Diamond Light Source (DLS), Didcot, have collaborated with the University ... Read more »
A recent report published in Tech-Clarity and commissioned by Razorleaf, discusses the state of global manufacturers’ use of digital resources to achieve their business objectives. The report reveals a gap between ... Read more »
Additive Manufacturing Research (AM Research), a provider of industry analysis, forecasting and data for the AM sector, has published a new market study titled “Additive Manufacturing of Small Arms Silencers: An AM Market ... Read more »
toolcraft AG, based in Georgensgmünd, Germany, and Siemens have created their first demonstrators for chemical reaction technology as part of the 3D-PROCESS project, funded by the Federal Ministry of Economics ... Read more »
The College of Engineering at the University of Puerto Rico (UPR) Mayagüez Campus (RUM) recently opened its metal Additive Manufacturing laboratory, reported the San Juan Daily Star. The university launched ... Read more »
The US Department of Energy’s Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee, USA, has announced a manufacturing programme for large metal parts. This initiative is said to show the potential to revitalise ... Read more »
Researchers from the University of Udine, Italy, and Kyoto Institute of Technology, Japan, published a paper focused on the re-use of metals in Additive Manufacturing in Metals magazine. In the paper, ‘The Challenges ... Read more »
The Advanced Manufacturing and Applied Research Innovation Institute (AMARII), a subsidiary of the National Center for Defense Manufacturing and Machining (NCDMM), is currently seeking ideas for the FY 2026 ... Read more »
The Indian Institute of Technology Madras (IIT) has received its largest ever single donation of Rs 228 crore (approximately $27 million) from Dr Krishna Chivukula, founder and CEO of INDO-MIM and an IIT Madras ... Read more »
6K Additive, a division of 6K, based in North Andover, Massachusetts, USA, has been selected by America Makes for its Powder Alloy Development of Additive Manufacturing (PADAM) project. Under the project, 6K Additive ... Read more »
Alleima, headquartered in Sandviken, Sweden, has signed an agreement with KTH Royal Institute of Technology, Stockholm, Sweden, to deepen collaboration in research and education, enhance scientific excellence ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online