Three weeks to submit papers for PowderMet2022
There are now three weeks left for interested parties to submit papers and presentations for PowderMet2022, scheduled to take place June 12–15, in Portland, Oregon, USA ... Read more »
News on metal Additive Manufacturing research
NMIS and Boeing officially open new R&D facility in Scotland
The National Manufacturing Institute Scotland (NMIS), Renfrew, Scotland, UK, and Boeing, have opened a new research and development (R&D) facility in Westway Park located in Renfrew ... Read more »
Incus AM technology to be tested in project for producing spare parts in space
Incus GmbH, Vienna, Austria, has announced that it has partnered with the European Space Agency (ESA), OHB System AG, Bremen, Germany, and Lithoz GmbH, Vienna, Austria, on a collaborative project ... Read more »
Velo3D helps to lay groundwork for industrial AM in Oil & Gas sector
Velo3D, Inc, Campbell, California, USA, has been providing advanced Additive Manufacturing technology to IMI Critical, a company that designs, manufactures and installs customised, highly-engineered ... Read more »
Strategy to further boost British space industry sector
The UK government has released its National Space Strategy, setting out a long-term vision for how the UK can establish itself as one of the most attractive, innovative space economies in the world ... Read more »
Ponticon’s pontiMAT system enables rapid alloy development
Ponticon, Wiesbaden, Germany, will showcase its pontiMAT system, a process that supports the development of metallic alloys for use in Additive Manufacturing, at Formnext 2021 ... Read more »
Aurora Labs delivers trial AM part for BAE Systems Maritime Australia project
Aurora Labs Limited (A3D), headquartered in Canning Vale, Australia, reports that it has completed the BAE Systems Maritime Australia (BAESMA) trial Additive Manufacturing project ... Read more »
Altair launches consortium to support Material Data Center
Altair, Troy, Michigan, USA, has announced the launch of the Altair® Material Data Center™ consortium, designed to help make its Altair Material Data Center (AMDC) ... Read more »
Morf3D’s Applied Digital Manufacturing Center partners with Starburst Aerospace
Morf3D, Inc, a Nikon subsidiary headquartered in El Segundo, California, USA, has announced that Starburst Aerospace has committed to a technology development partnership ... Read more »
Texas A&M publishes research on cooling properties for non-porous AM parts
A new study by Texas A&M University researchers, and published in the journal Additive Manufacturing, has further refined the process of creating superior metal parts using Laser Beam Powder Bed Fusion ... Read more »
LLNL explores laser beam shaping to improve metal AM
Researchers from Lawrence Livermore National Laboratory (LLNL), California, USA, have been working to address issues such as defects and poor mechanical performance that can arise during ... Read more »
AddUp provides FormUp 350 to Ohio State University
AddUp, Inc, the American subsidiary of France’s AddUp SAS, and The Ohio State University have announced the installation of a FormUp 350 Laser Beam Powder Bed Fusion (PBF-LB) machine ... Read more »
3DQue successfully tests automation technology for reduced-cost AM
3DQue Systems Inc, Vancouver, British Columbia, Canada, has announced the successful testing of Quinly automation for metal Additive Manufacturing. Quinly, a hands-free virtual ... Read more »
Eplus3D and Delta Racing develop AM wheel carrier for Formula Student race series
Eplus3D, Hangzhou, China, has showcased its Additive Manufacturing technology when the company collaborated with the Delta Racing Team of Mannheim University of Applied Sciences ... Read more »
Solar Atmospheres retrofits vacuum furnace for MIM and sinter-based AM
Solar Atmospheres of Western PA, Hermitage, Pennsylvania, USA, reports it has successfully retrofitted a pre-owned vacuum furnace with a new hot zone and pumping technology to enable the furnace ... Read more »
2021 International Symposium on Innovation in Materials Processing to take place in Korea
The third International Symposium on Innovation in Materials Processing (ISIMP 2021) is scheduled take place in Jeju, South Korea, October 26-29, 2021. Organised by the Korean Powder Metallurgy ... Read more »
Binder Jetting status update, China’s largest MIM company: All in the latest PIM International
The September 2021 issue of PIM International (Vol. 15 No. 3), the magazine for MIM, CIM and sinter-based Additive Manufacturing, is available to read for free online or download in pdf format ... Read more »
SSI and ExOne to accelerate volume production in metal Binder Jetting
SSI Sintered Specialties, headquartered in Janesville, Wisconsin, USA, has announced its purchase of an X1 160Pro and InnoventPro 3L metal Binder Jetting (BJT) Additive Manufacturing machines ... Read more »
AMTC Advanced Manufacturing Technology Conference releases programme
The fourth global AM conference of the Advanced Manufacturing Technology Conference (AMTC, formerly MTC) is taking place from October 12-14, 2021, in Aachen, Germany. For location capacity ... Read more »
EPMA Club Projects on combination of AM and HIP open to industry
The European Powder Metallurgy Association (EPMA) in partnership with RWTH Aachen University, Germany, is in the preliminary stages of establishing two new Club Projects looking at the combination ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- BLT: Inside the world’s largest metal Additive Manufacturing parts-production operation
- Nuclear fusion’s manufacturing challenge: Where metal Additive Manufacturing can make the difference
- From alloy design to aerospace components: Industrialising the ATI® 1700® superalloy for metal Additive Manufacturing
- From coupon to component: Qualifying wire arc DED for the US Submarine Force
- Scaling wire arc Directed Energy Deposition: Building on existing qualification evidence at WAAMathon #3
- Hidden cracks in pure tungsten: How JEOL changed the PBF-EB thermal cycle
- Titanium bellows: Engineering flexibility and testing durability with metal Additive Manufacturing
- Build plate resurfacing in metal Additive Manufacturing: A practical guide to process control
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online