EOS partners with ORNL for metal AM quality control
EOS GmbH, headquartered in Krailling, Germany, has entered into a Cooperative Research and Development Agreement (CRADA) ... Read more »
News on metal Additive Manufacturing research
MIT researchers use AI to control Additive Manufacturing perimeters
Researchers from the Massachussets Institute of Technology (MIT), Cambridge, USA, have published the paper “Closed-Loop Control of Direct Ink Writing via Reinforcement Learning” discussing the use of ... Read more »
UCLA and LLNL materials scientists receive grant to develop AM lithium-ion batteries
Materials scientists at the University of California, Los Angeles (UCLA) Samueli School of Engineering, led by Bruce Dunn and Morris Wang, along with colleagues at Lawrence Livermore National Laboratory ... Read more »
Additively manufactured heat exchangers enable SOFC operation in ships
A research project to convert diesel into a fuel gas for solid oxide fuel cells (SOFC), and the coupling with an energy storage system for operation on ships, has been successfully completed under the lead of OWI ... Read more »
IperionX and ORNL collaborate for low-cost titanium alloys
IperionX Limited, Charlotte, North Carolina, USA, and Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, are collaborating to develop low-cost titanium alloys for Additive Manufacturing using ... Read more »
NIST awards $3.7 million to support metal Additive Manufacturing
The US Department of Commerce’s National Institute of Standards and Technology (NIST), Gaithersburg, Maryland, USA, has awarded $3.7 million in grants to help address current and future barriers to ... Read more »
America Makes announces three project calls totalling $4.6 million
America Makes, Youngstown, Ohio, USA, has announced three new project calls intended to accelerate the adoption of Additive Manufacturing and offer a way for the supply chain to engage with the institute ... Read more »
GKN Aerospace adds Renishaw RenAM 500Q Flex at its Global Technology Centre
GKN Aerospace has expanded the range of metal Additive Manufacturing machines at the company’s Global Technology Centre in Bristol, UK, with installation of a RenAM 500Q Flex from Renishaw, ... Read more »
Peekay Group opens Additive Manufacturing facility at India’s Bengaluru Airport City
An Additive Manufacturing facility is now operational at the Bengaluru Airport City, Karnataka, India, following collaboration between the Peekay Group, Kozhikode, Kerala, and Bengaluru Airport City Limited ... Read more »
Collins Aerospace breaks ground on $14 million Additive Manufacturing centre expansion
Collins Aerospace, headquartered in Charlotte, North Carolina, USA, has broken ground on a $14 million expansion of its Additive Manufacturing centre in West Des Moines, Iowa. ... Read more »
S&P study finds copper supply may pose challenge in achieving net-zero goals
Analytics company S&P Global, headquartered in New York, USA, has published a study entitled ‘The Future of Copper: Will the looming supply gap short-circuit the energy transition’. This study comes as a ... Read more »
PMTi2022 conference set to take place in digital and in-person format
The upcoming PMTi2022: The Powder Metallurgy and Additive Manufacturing of Titanium conference, organised by the Metal Powder Industries Federation (MPIF), is now scheduled to take place as a hybrid event ... Read more »
InShaPe project aims to increase competitiveness of metal Laser Beam Powder Bed Fusion process
A new research and innovation project called InShaPe, conducted by the Technical University of Munich (TUM) and nine other partners from seven countries, has been launched to further develop metal Laser ... Read more »
Ursa Major delivers its first additively manufactured rocket engine components
Ursa Major Technologies Inc, headquartered in Berthoud, Colorado, USA, has delivered its first copper-based additively manufactured rocket engine combustion chambers from its Additive Manufacturing lab ... Read more »
3D Metrology Conference set for return to Aachen in November
This year’s 3D Metrology Conference (3DMC) is set to take place in Aachen, Germany, from November 15–17, 2022. The 3DMC is recognised as one of the most important conferences in the field of industrial ... Read more »
EPMA ADDress project launched
The European Powder Metallurgy Association (EPMA) has announced the launch of the ADDress project which commenced with an online meeting on July 7. The ADDress project aims to raise awareness of the ... Read more »
Elementum 3D’s A7050-RAM2 aluminium aerospace alloy outperforms 7050 wrought
A7050-RAM2, an aerospace and speciality Additive Manufacturing aluminium alloy from Elementum 3D, Erie, Colorado, USA, features a combination of high toughness and strength, as well as good stress ... Read more »
Researchers review processes for tungsten Additive Manufacturing
A team of researchers from the University of California, Texas A&M University, Lawrence Livermore National Laboratory (LLNL), and Oak Ridge National Laboratory (ORNL), has published a paper reviewing ... Read more »
LLNL and Ampcera use Additive Manufacturing in creation of battery cathodes
Lawrence Livermore National Laboratory (LLNL), Livermore, California, USA, is partnering with Ampcera Inc, headquartered in Milpitas, California, to develop Laser Beam Powder Bed Fusion (PBF-LB) Additive ... Read more »
Rosswag’s PBF-LB parameter marketplace now in beta phase
Rosswag Engineering, Pfinztal, Germany, reports it is currently developing a Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing process and parameter marketplace, expected to make the ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online