Formnext organiser Mesago Messe Frankfurt GmbH has extended its deadline for the Start-up Challenge award. The deadline, originally July 2, is now July 16, 2021, with winners expected to be announced ... Read more »
MetShape GmbH, headquartered in Pforzheim, Germany, a manufacturer specialising in a Vat Photopolymerisation (VPP) process it refers to as Lithography-based Metal Manufacturing (LMM) ... Read more »
Elementum 3D, Erie, Colorado, USA, was awarded two SBIR Phase I in May and June 2021 by NASA and the US Department of the Navy, respectively. The first SBIR is centred around the development ... Read more »
The National Centre for Additive Manufacturing (NCAM) has launched the latest round of internal funding for its AM teams to build internal research capability. This funding is intended for research ... Read more »
Norsk Titanium AS, Hønefoss, Norway, has received the first disbursement (30%) of a NOK 35 million (approx. $4 million) grant awarded by Innovation Norway, following a successful private placement ... Read more »
The BEAMIT Group, Fornovo di Taro, Italy, has developed an Additive Manufacturing process for using Al2024 RAM2C aluminium alloy. The ultralight aluminium alloy is reported to perform ... Read more »
Advanced AM Titanium Materials specialist Z3DLAB Montmagny, Îl-de-France, France, and a consortium of Centre national de la recherche scientifique (CNRS) have received funding from the French National ... Read more »
The International Virtual Academy, INVIRTA, is offering an online Additive Manufacturing Summer School, from August 30–September 3, 2021. This online programme will provide an overview of the key issues ... Read more »
AMEXCI, Karlskoga, Sweden, reports that it is establishing AMEXCI OY, a subsidiary in Finland focused on developing Additive Manufacturing technologies. The subsidiary is funded by Sweden’s Saab ... Read more »
The Applied Research Laboratory of Penn State University, Pennsylvania, USA, a US Department of Defense designated University Research Centre, has acquired a LightSPEE3D Cold Spray metal Additive Manufacturing ... Read more »
The European Powder Metallurgy Association (EPMA) has announced that the PM Life Additive Manufacturing Training will take place as a hybrid training event in 2021, providing greater flexibility in terms of accessibility ... Read more »
GE Research’s interdisciplinary team, led by Lana Osusky, working with top experts from the University of Maryland and Oak Ridge National Laboratory (ORNL), USA, have successfully built and tested a subscale ... Read more »
The organisers of the 3D Print Congress and Exhibition, held in Lyon, France, are launching a second event in Paris on October 20–21, 2021. The trade show is an opportunity to showcase a wide variety of AM technologies ... Read more »
Sakuu Corporation, San Jose, California, USA, has received approval of three new patents: a hybrid solid-state cell with a sealed anode structure, an Additive Manufacturing system with the ability to create ... Read more »
Additive Manufacturing parts producer and service provider Amaero International Limited, headquartered in Notting Hill, Victoria, Australia, has entered into a research collaboration with Swinburne University ... Read more »
The 2021 ASTM International Conference on Additive Manufacturing (ICAM 2021) has released a preliminary programme. Sponsored by the ASTM International Additive Manufacturing Center of Excellence, ICAM 2021 ... Read more »
Agile Space Industries, a space propulsion technologies company headquartered in Durango, Colorado, USA, has announced the acquisition of metal Additive Manufacturing company Tronix3D ... Read more »
Ipsen USA’s Vacuum Technology Excellence Center has reportedly surpassed its record 2018 pre-pandemic equipment sales pace during the first five months of 2021. While standard furnace sales have steadily recovered ... Read more »
Solukon Maschinenbau GmbH, Augsburg, Germany, has teamed up with industrial automation solutions supplier Festo, Esslingen, Germany, to identify by how much the level of automation in the depowdering stage ... Read more »
Global industrial gas specialist Linde, Guildford, Surrey, UK, has announced the results from testing its new process gas developed for the optimisation of the Additive Manufacturing of medical components ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online