A new UK and European consortium is developing two Wire Arc Additive Manufacturing (a Directed Energy Deposition process) variants to achieve improvements in deposition rates and build efficiency ... Read more »
PrintSky, a French joint venture between Sogeclair and AddUp specialised in developing and additively manufacturing complex metal components, has been selected by Collins Aerospace to participate in its ... Read more »
CSEM (Centre Suisse d’ Electronique et de Microtechnique), headquartered in Neuchâtel, Switzerland, is coordinating a high-profile EU-funded project to enhance the performance of thermal control systems by ... Read more »
Researchers from the National Institute of Standards and Technology (NIST), the University of Wisconsin-Madison and Argonne National Laboratory have recently published a paper in Additive Manufacturing ... Read more »
IperionX Limited, based in Charlotte, North Carolina, USA, has successfully commissioned Stage 2 of its Mineral Demonstration Facility (MDF) at the Titan Project in Tennessee to produce a critical mineral ... Read more »
Researchers from Monash University, based in Melbourne, Australia, have published a study which demonstrates the use of Additive Manufacturing to develop an ultra-strong titanium alloy via the ... Read more »
LIFT, the US Department of Defense manufacturing innovation institute based in Detroit, Michigan, USA, and the US Department of Defense (DoD) have announced the launch of two projects led by Boeing as ... Read more »
Researchers from De Montfort University, Leicester, UK, are said to have successfully correlated the quality of additively manufactured polyamide specimens with powder properties measured by the FT4 Powder ... Read more »
America Makes, Youngstown, Ohio, USA, and the American National Standards Institute (ANSI) have announced plans for the America Makes and ANSI Additive Manufacturing Standardization Collaborative ... Read more »
Eplus3D, headquartered in Hanzhou, China, has opened its European office in Ludwigsburg, Germany. The new facility, with over 600 m2 floor space, is equipped with a dedicated Additive Manufacturing ... Read more »
Safina, based in Vestec, Czech Republic, and the Czech branch of the German Präzi Group, based in Napajedla, are collaborating on a project that combines various additive manufacturing methods to ... Read more »
Uniformity Labs, Fremont, California, USA, has partnered with race car engine developer Polimotor, Wellington, Florida, and Incodema3D, Freeville, New York, to additively manufacture and evaluate a cam ... Read more »
InssTek, a metal Additive Manufacturing solutions provider based in Daejeon, South Korea, has released its Material Database, a guide covering the fifteen materials the company offers in its standard material ... Read more »
Elementum 3D, Erie, Colorado, USA, has begun work on a US Army Small Business Technology Transfer (STTR) project that partners with Georgia Tech and Addiguru, LLC, Louisiana, USA, to improve the ... Read more »
The KU Leuven Additive Manufacturing Group, Belgium, has recently added a four-point rotary bending machine from ZwickRoell, headquartered in Ulm, Germany, to its Additive Manufacturing durability lab ... Read more »
Blue Power Casting Systems GmbH, Walzbachtal, Germany, has launched a new high-temperature gas atomisation system for platinum and other high melting alloys following a collaboration with Indutherm ... Read more »
Researchers from Composite Materials and Mechanics Laboratory, Mechanical and Aerospace Engineering Department, New York University, Tandon School of Engineering, have released a paper ... Read more »
Researchers from Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, USA; University of California, Berkeley; General Electric Global Research Center, Niskayuna, New York; and Japan Atomic ... Read more »
Bhabha Atomic Research Centre (BARC), Mumbai, India, has collaborated with Intech Additive Solutions, Bengaluru, to additively manufacture a sample miniature metal component ... Read more »
Eplus3D, Hangzhou, China, recently undertook a project to combine its Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing technology with CNC ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online