Wayland Additive Calibur3 metal Additive Manufacturing machine acquired by Fraunhofer IPK
Wayland Additive has announced that Fraunhofer IPK has purchased a Calibur3 Additive Manufacturing machine ... Read more »
News on metal Additive Manufacturing research
ValCUN joins manufacturing demonstrator at Brainport Industry Campus to showcase Additive Manufacturing
ValCUN, headquartered in Ghent, Belgium, reports it has joined the manufacturing demonstrator at Brainport Industry Campus (BIC), located in Eindhoven, Netherlands. The company aims to showcase the value of AM ... Read more »
National Science Foundation grant to study fatigue in additively manufactured shape memory alloys
The US National Science Foundation (NSF) has awarded a team, including Penn State Shenango Associate Teaching Professor of Engineering Matthew Caputo, $445,515 to investigate the fatigue behaviour of additively ... Read more »
Pre-contouring to improve the compatibility of Inconel939 with Laser Powder Bed Fusion
Researchers from IMDEA Materials Institute, Madrid, Spain and Industria de Turbopropulsores SAU, Bizkaia, have published a paper in *Advanced Engineering Materials,* that looks at the use of contour scanning ... Read more »
Fraunhofer ILT develops flexible beam-shaping process to optimise PBF-LB Additive Manufacturing
The Fraunhofer Institute for Laser Technology (ILT) and the Chair of Technology of Optical Systems (TOS) at RWTH Aachen University have announced a collaboration aiming to create a state-of-the-art test machine ... Read more »
Beehive Industries secures $12.4 million contract for Additively Manufacturing low-cost jet engines
Beehive Industries, based in Englewood, Colorado, USA, has been awarded a $12.46 million contract to collaborate on the development and production of low-cost Small Expendable Turbine (SET) engines ... Read more »
Elkem partners with Startuplab to drive green industrial innovation
Elkem ASA, headquartered in Oslo, Norway, and Startuplab, an incubator and early-stage investor for technology startups, also based in Oslo, have entered into a strategic partnership to accelerate the development ... Read more »
InssTek reports on alloy development success with its MX-Lab DED machine
InssTek, headquartered in Daejeon, South Korea, has reportedly seen significant global success with its metal Additive Manufacturing machine, MX-Lab, which continues to attract leading universities and research ... Read more »
Thermo Fisher highlights use of advanced SEM for metal quality control analysis
Thermo Fisher Scientific, headquartered in Waltham, Massachusetts, USA, has highlighted the ability of Scanning Electron Microscopy (SEM) to successfully capture defects when conducting failure analysis on metals ... Read more »
YASA partners with Formula Student 2025 and begins search for engineering placements
YASA, a wholly owned subsidiary of Mercedes-Benz headquartered in Kidlington, Oxfordshire, has announced it will partner with Formula Student in 2025. In celebration of this, YASA has begun a campaign ... Read more »
Researchers characterise T1 phase in different Additive Manufacturing processes
Researchers from RWTH Aachen University, Aachen, Germany, recently published an open-access paper focusing on the use of Al-Cu-Li alloys and their place in Additive Manufacturing. The high strength ... Read more »
Novel wet etching technique boosts absorptivity of metal powders for Additive Manufacturing
A team from the United State’s Lawrence Livermore National Laboratory (LLNL), Stanford University and the University of Pennsylvania, has developed a novel wet chemical etching process that modifies the surface ... Read more »
TU Dortmund acquires Gefertec’s arc405 for research and development
The Chair for Materials Technology of the Department of Mechanical Engineering at the Technical University of Dortmund, Germany, has acquired an arc405 Wire Arc Additive Manufacturing (WAAM) ... Read more »
Malaysia’s SIRIM receives grant for customised titanium fracture fixation plate implants
The Standard and Industrial Research Institute of Malaysia (SIRIM) Berhad has been awarded a grant from The Ministry of Investment, Trade and Industry (MITI) Malaysia to further study a recently developed titanium ... Read more »
2024 Excellence in Metallography Award won by Additive Manufacturing powder research paper
The Metal Powder Industries Federation (MPIF) has selected the paper “Impact Resistance of a Free Sintering Low Alloy Steel Produced by Powder Bed Fusion Using a Laser Beam”, by Thomas F Murphy ... Read more »
HP Metal Jet S100 enables advanced metal Binder Jetting research at RWTH Aachen University DAP
HP has shared that the Digital Additive Production DAP – RWTH Aachen at RWTH Aachen University, Germany, has added a HP Metal Jet S100 Binder Jetting Additive Manufacturing machine to its facility ... Read more »
MPIF releases proceedings of PowderMet2024 and AMPM2024
The MPIF has released the proceedings of PowderMet2024 and AMPM2024, which took place earlier this year in Pittsburgh, Pennsylvania, USA. The PDF proceedings are fully searchable and preserve the colour ... Read more »
Freemelt secures order from leading US research institute for refractory metal processing
Freemelt AB, based in Mölndal, Sweden, has received an order for a Freemelt ONE Electron Beam Powder Bed Fusion (PBF-EB) Additive Manufacturing machine from a leading research institute that targets material ... Read more »
University of Birmingham orders Freemelt ONE for material process development
The University of Birmingham, UK, has ordered a Freemelt ONE Electron Beam Powder Bed Fusion (PBF-EB) Additive Manufacturing machine from Freemelt, based in Mölndal, Sweden. The university is expected to use ... Read more »
Copper Additive Manufacturing investigated for optimised synchrotron absorbers
The Science Technology Facilities Council’s (STFC) UK Astronomy Technology Centre (UK ATC), Edinburgh, and the UK’s National Synchrotron Diamond Light Source (DLS), Didcot, have collaborated with the University ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online