Seco/Warwick publishes Additive Manufacturing ebook
Heat treatment furnace manufacturer, Seco/Warwick Group, headquartered in Swiebodzin, Poland, has published an ebook on Additive Manufacturing titled ‘Additive Manufacturing World’ ... Read more »
Metal Additive Manufacturing equipment news
Fraunhofer ILT Laser Technology Congress cancelled, next edition to take place in 2022
Fraunhofer Institute for Laser Technology (ILT), Aachen, Germany, has announced that AKL’20, the International Laser Technology Congress, which was recently postponed due to the spread of coronavirus ... Read more »
Mesago Messe Frankfurt reports high registration figures for Formnext 2020
Mesago Messe Frankfurt GmbH, the organiser of Formnext, reports that it is receiving high registration figures for this year’s event, scheduled to take place in Frankfurt, Germany, November 10–13 ... Read more »
Formnext + PM South China announces support from German manufacturing groups
Formnext + PM South China, scheduled to take place September 9-11, 2020, in Shenzhen, China, has announced official partnerships with the Aachen Center for Additive Manufacturing (ACAM) ... Read more »
Metal Technology Co to acquire Sandvik Powder Solutions AB
Metal Technology Co. Ltd., a leading metal processing company headquartered in Tokyo, Japan, has announced a share transfer agreement to acquire all the shares of Sandvik Powder Solutions AB ... Read more »
EOS launches 3DAgainstCorona platform to support fight against COVID-19
EOS GmbH, headquartered in Krailling, Germany, has launched an online platform and LinkedIn group to to allow the Additive Manufacturing community to participate in tackling the challenges ... Read more »
Würth Industry North America signs distribution agreement with Markforged
Würth Industry North America (WINA), a division of the Würth group and an industrial distributor of supply chain solutions for fasteners, MRO and safety equipment, has signed a national agreement ... Read more »
Analysis of Additive Manufacturing materials from Wohlers and Senvol Database
Data from the Senvol Database, compiled by Senvol, New York City, USA, was used to provide an historical analysis of Additive Manufacturing materials in Wohlers Report 2020. The annual Wohlers Report ... Read more »
EPMA postpones Additive Manufacturing Seminar until December
The European Powder Metallurgy Association (EPMA) has announced that due to travel restrictions caused by the coronavirus (COVID-19), and to safeguard its speakers and delegates, the decision ... Read more »
Study showcases efficient and fully automatic finishing process for internal passages in AM parts
The mechanical and chemical engineering departments of the Politecnico Milano, Italy, together with Rösler Italiana S.r.l., part of Germany’s Rösler Oberflächentechnik GmbH, have conducted ... Read more »
The global Additive Manufacturing community responds to coronavirus
The spread of the coronavirus (COVID-19) is having a major impact on the global manufacturing industry, with both supply chains and markets being heavily effected. As the number of patients requiring ... Read more »
MPIF cancels AMPM2020, WORLDPM2020 and Tungsten2020 due to coronavirus (COVID-19)
The Metal Powder Industries Federation (MPIF) has announced that the 2020 Additive Manufacturing with Powder Metallurgy conference (AMPM), the 2020 World Congress on Powder Metallurgy & Particulate ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online