Laseradd Technology (Guangzhou) Co., Ltd, Guangzhou, China, has showcased four of its metal Additive Manufacturing systems at TCT Asia, running from March 1-3 in Shanghai, China. The company ... Read more »

Sweden’s Höganäs AB has completed its previously reported take over of H.C. Starck’s Surface Technology & Ceramic Powders (STC) business. Reported to be Höganäs’ largest acquisition so far ... Read more »

Stratasys Ltd, based in Minneapolis, Minnesota, USA, and Rehovot, Israel, reports that it is developing a new metal Additive Manufacturing platform designed to offer a viable solution for ... Read more »

Oerlikon, Pfäffikon Schwyz, Switzerland, has signed a long-term collaboration agreement with Farsoon Technologies, Hunan, China, to supply qualified Oerlikon metal powders for Farsoon’s metal ... Read more »

The TCT Asia 2018 conference and exhibition is now underway at the Shanghai New International Expo Center in Shanghai, China. The event is running from February 28-March 3, 2018, with the exhibit ... Read more »

Additive Manufacturing consultant firm Ampower and AM service provider H & H, both based in Hamburg, Germany, will cooperate to offer joint training in Additive Manufacturing. According to the partners ... Read more »

SLM Solutions Group AG, Lubeck, Germany, will showcase its SLM®280 2.0 Additive Manufacturing system for industrial use during TCT Asia 2018, Shanghai, China. SLM Solutions also states ... Read more »

GKN plc has reported record sales in its full year 2017 results. The global engineering group’s sales were up 11% at £10,409 million, the first time the group has exceeded £10 billion. Excluding ... Read more »

The EPMA’s AM Summer School, part of the AM-Motion European H2020 Project, will be held from the September 4-7, 2018, at Prodintec, Gijon, Asturias, Spain. The overall objective of the AM-Motion ... Read more »

CADEX Ltd., Nizhny Novgorod, Russia, has launched a free-to-use beta version of its CAD Exchanger Cloud, a private or public service designed to accelerate collaborative CAD design processes ... Read more »

Carpenter Technology Corporation, USA, has announced senior operating leadership changes within the organisation. The company announced that Joe Haniford, CEO, will assume a new role ... Read more »

Farsoon Technologies, Hunan, China, recently announced the establishment of a new subsidiary in Germany, with the aim of expanding Farsoon operations into Europe. The company has appointed Dirk Simon ... Read more »

PyroGenesis Canada Inc., Montreal, Canada, reports that it has received certification for the production of metal powders under a quality management system which complies with the requirements of ISO 9001:2008 ... Read more »

Carpenter Technology Corporation, Philadelphia, Pennsylvania, USA, reports that it has acquired MB CalRAM LLC, a metal Additive Manufacturing service provider. CalRAM supplies powder bed fusion ... Read more »

Optomec, Albuquerque, New Mexico, USA, has signed a partnership agreement with Husun Technologies, Beijing, China, to resell its LENS Systems for metal Additive Manufacturing in China ... Read more »

A new Singapore-based digital platform, Hitch3DPrint, has launched to enable companies to take advantage of spare capacity in third-party metal Additive Manufacturing build lots. According to its founder… ... Read more »

An AM Stakeholder Workshop will be held at the Fraunhofer Institute for Laser Technology ILT in Aachen, Germany, March 20, 2018. Part of the institute’s AMable project, which was set up to aid ... Read more »

Argentinian orthopedic implant company Imeco S.A. reports that it has recently installed its first metal additively manufactured hip replacement. The company first discovered the potential of metal AM ... Read more »

SLM Solutions Group AG, Lubeck, Germany, reports that its Selective Laser Melting (SLM) systems are being used by Audi AG for the metal Additive Manufacturing of components for special and exclusive ... Read more »

Surgeons at Morriston Hospital, Wales, UK, have successfully rebuilt part of a patient’s chest using metal Additive Manufacturing. The titanium implant was additively manufactured on a Renishaw system ... Read more »