EOS partners with ORNL for metal AM quality control
EOS GmbH, headquartered in Krailling, Germany, has entered into a Cooperative Research and Development Agreement (CRADA) ... Read more »
News on metal Additive Manufacturing research
MIT researchers use AI to control Additive Manufacturing perimeters
Researchers from the Massachussets Institute of Technology (MIT), Cambridge, USA, have published the paper “Closed-Loop Control of Direct Ink Writing via Reinforcement Learning” discussing the use of ... Read more »
UCLA and LLNL materials scientists receive grant to develop AM lithium-ion batteries
Materials scientists at the University of California, Los Angeles (UCLA) Samueli School of Engineering, led by Bruce Dunn and Morris Wang, along with colleagues at Lawrence Livermore National Laboratory ... Read more »
Additively manufactured heat exchangers enable SOFC operation in ships
A research project to convert diesel into a fuel gas for solid oxide fuel cells (SOFC), and the coupling with an energy storage system for operation on ships, has been successfully completed under the lead of OWI ... Read more »
IperionX and ORNL collaborate for low-cost titanium alloys
IperionX Limited, Charlotte, North Carolina, USA, and Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, are collaborating to develop low-cost titanium alloys for Additive Manufacturing using ... Read more »
NIST awards $3.7 million to support metal Additive Manufacturing
The US Department of Commerce’s National Institute of Standards and Technology (NIST), Gaithersburg, Maryland, USA, has awarded $3.7 million in grants to help address current and future barriers to ... Read more »
America Makes announces three project calls totalling $4.6 million
America Makes, Youngstown, Ohio, USA, has announced three new project calls intended to accelerate the adoption of Additive Manufacturing and offer a way for the supply chain to engage with the institute ... Read more »
GKN Aerospace adds Renishaw RenAM 500Q Flex at its Global Technology Centre
GKN Aerospace has expanded the range of metal Additive Manufacturing machines at the company’s Global Technology Centre in Bristol, UK, with installation of a RenAM 500Q Flex from Renishaw, ... Read more »
Peekay Group opens Additive Manufacturing facility at India’s Bengaluru Airport City
An Additive Manufacturing facility is now operational at the Bengaluru Airport City, Karnataka, India, following collaboration between the Peekay Group, Kozhikode, Kerala, and Bengaluru Airport City Limited ... Read more »
Collins Aerospace breaks ground on $14 million Additive Manufacturing centre expansion
Collins Aerospace, headquartered in Charlotte, North Carolina, USA, has broken ground on a $14 million expansion of its Additive Manufacturing centre in West Des Moines, Iowa. ... Read more »
S&P study finds copper supply may pose challenge in achieving net-zero goals
Analytics company S&P Global, headquartered in New York, USA, has published a study entitled ‘The Future of Copper: Will the looming supply gap short-circuit the energy transition’. This study comes as a ... Read more »
PMTi2022 conference set to take place in digital and in-person format
The upcoming PMTi2022: The Powder Metallurgy and Additive Manufacturing of Titanium conference, organised by the Metal Powder Industries Federation (MPIF), is now scheduled to take place as a hybrid event ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- Inside Nikon’s metal Additive Manufacturing strategy, Part 1: Hamid Zarringhalam on building a new growth pillar
- Inside Nikon’s metal Additive Manufacturing strategy, Part 2: Scaling industrial production in Long Beach
- Steel reinvented: Colnago’s Steelnovo and the search for the perfect modern road bike
- Additive Manufacturing in US defence logistics: From technical progress to operational capability
- Additive Manufacturing Strategies 2026: Strategy without the strategy-speak in a maturing AM industry
- Wire-based Directed Energy Deposition in large-scale metal Additive Manufacturing: Choosing the right process
- Industrialising Haynes® 282®: Laser Powder Directed Energy Deposition for high-temperature performance
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online