Researchers from Hiroshima University, Japan, have published a study titled ‘Effect of the hot-wire laser irradiation method and a Ni-based alloy middle layer on mechanical properties and microstructure in Additive ... Read more »
Phoenix Scientific Industries (PSI), based in Hailsham, United Kingdom, has highlighted what it describes as a newer and increasingly promising approach for producing oxygen dispersion strengthened (ODS) alloys ... Read more »
Researchers from University College London, Brunel University London, Research Complex at Harwell, University of Bristol, Diamond Light Source, and Oxford Brookes University have partnered to publish research ... Read more »
Valimet, Inc, headquartered in Stockton, California, USA, has been awarded an SBIR Phase II contract for the project: “Scandium-Aluminum Alloy 3D-Printed Parts: Developing & Validating a Domestic Value Chain. ... Read more »
Xi’an Bright Laser Technologies Co, Ltd (BLT), China, has reported a milestone in copper Additive Manufacturing. As of March 2026, cumulative production has exceeded 100,000 components on its BLT-S400 eight-laser ... Read more »
CNPC Powder, headquartered in Vancouver, Canada, showcased its joint work with German automotive supplier Brose at TCT Asia 2026, held March 17–19 in Shanghai, China. The collaboration integrates metal recycling ... Read more »
LAYRR, based in Abingdon, UK, has developed a high-speed surface engineering process, adapted from Physical Vapour Deposition (PVD), to modify standard metal powders at the atomic level. The approach is intended ... Read more »
Farsoon Europe GmbH, based in Sindelfingen, Germany, has extended its collaboration with Tekna Holding ASA, headquartered in Sherbrooke, Quebec, Canada, to support the industrialisation of coarse Ti-6Al-4V ... Read more »
Aconity3D GmbH, based in Herzogenrath, Germany, has introduced a new multi-material welding head for its AconityWIRE laser-based Direct Energy Deposition Additive Manufacturing technology. The new head ... Read more »
As part of the AM2SoftMag (Additive Manufacturing of Amorphous Metals for Soft Magnetics) project, researchers from Saarland University, Saarbrücken, Germany, are developing metallic glass alloys for the Additive ... Read more »
Metalysis Ltd, Rotherham, UK, has been awarded near €1 million in funding from the European Space Agency (ESA) to develop a continuous or quasi-continuous process for titanium ... Read more »
Japanese researchers from Hiroshima University and Mitsubishi Materials Hardmetal Corporation have published research in the International Journal of Refractory Metals and Hard Materials focused on the use of laser-based ... Read more »
6K Additive, a division of 6K, based in North Andover, Massachusetts, USA, has signed a global long‑term supply agreement under which Siemens Energy will supply spent nickel alloy powder from its Additive Manufacturing ... Read more »
PyroGenesis Inc, headquartered in Montreal, Quebec, Canada, has signed a contract with a scientific aerospace research organisation for the supply of titanium metal powder produced by PyroGenesis’ NexGen ... Read more »
In partnership with Cranfield University and ITP Aero, Alloyed Ltd, based in Oxford, UK has secured funding to accelerate the development of ABD-1000AM, a high-temperature nickel-based superalloy specifically ... Read more »
GMH Gruppe, Georgsmarienhütte, Germany, has combined the production of advanced metal powders and Additive Manufacturing under the umbrella of ProMateria GmbH. The new company, led by Robert Teuber ... Read more »
Tekna Holding ASA, headquartered in Sherbrooke, Quebec, Canada, announced that it has produced its one millionth kilogram of titanium powder. The company began developing its atomisation process in 2015 ... Read more »
Japanese researchers from Hiroshima University, Higashi-Hiroshima, and Mitsubishi Materials Hardmetal Corporation, Gifu, have reported the successful Additive Manufacturing of tungsten carbide–cobalt (WC-Co) ... Read more »
AddMamBa, the BMWE-funded research project at the RWTH Aachen University Chair Digital Additive Production (DAP), is investigating how CO₂ emissions and resource consumption in the construction sector ... Read more »
In a new study published in Advanced Materials, researchers from Lawrence Livermore National Laboratory (LLNL) and collaborators from several universities have demonstrated a method to guide the settling ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online