The first international VDI Conference ‘Additive Manufacturing’ will take place in Amsterdam on April 25-26, 2018. According to the event organisers, the conference will provide a cross-industry ... Read more »

GE has announced that Arcam AB has now been delisted from the Nasdaq (Stockholm) exchange, a move which the company states will allow a more fulsome integration with GE ... Read more »

Renishaw plc has announced that William Lee has been appointed Chief Executive. The company reported that its former Chief Executive, Sir David McMurtry, has decided to hand over his Chief Executive ... Read more »

Dr Axel Schulz will join the Management Board of SLM Solutions Group AG as Chief Sales Officer on February 1, 2018, the company has announced. Schulz will assume responsibility for the company’s ... Read more »

Researchers at the National Research Council of Canada (NRC), Ottawa, Ontario, Canada, have developed a method to produce permanent magnets by cold spray metal Additive Manufacturing for electric motors ... Read more »

BEAMIT SpA, Fornovo di Taro, Italy, has expanded its heat treatment capability for the processing of metal additively manufactured components. In addition to the installation of a new, higher capacity ... Read more »

Boeing and Norsk Titanium have been selected as one of the winners of Aviation Week & Space Technology’s 61st Annual Laureate Awards, in the category of Commercial, Supplier Innovation ... Read more »

ArianeGroup, Issy-les-Moulineaux, France, reports that its Vulcain® 2.1 engine has completed its first successful test firing at the German Aerospace Center in Lampoldshausen, Germany. The engine ... Read more »

Bugatti Automobiles S.A.S. has successfully designed a titanium brake caliper that can be produced by metal Additive Manufacturing. Developed in partnership with German-based Laser Zentrum Nord ... Read more »

RPM Innovations, Inc. (RPMI) has relocated to a new 50,000 ft2 facility in Rapid City, South Dakota, USA. According to RPMI, the new facility will provide the space necessary to nearly triple ... Read more »

Discounted early-bird registration for MIM2018, the International Conference on the Injection Moulding of Metals, Ceramics & Carbides, will close on February 2, 2018. MIM2018 ... Read more »

The American Society of Mechanical Engineers (ASME), New York City, USA, has published its ‘Product Definition for Additive Manufacturing [Draft Standard for Trial Use]’, Y14.46-2017. Developed under ... Read more »

Sweden’s Sandvik AB has been named one of the 100 Most Sustainable Corporations in the World, according to the Global 100 index released in January, 2018. The index is generated by analysing 5,994 publicly ... Read more »

Bodycote’s Hot Isostatic Pressing (HIP) facility at Sint Niklaas, Belgium, is awaiting delivery of a new ‘Mega-HIP’ unit which is expected to be operational by the end of 2018. According to ... Read more »

Specialist subcontract engineering company, GB Precision, Birmingham, UK, reports that it has been transforming additively manufactured parts into high precision tooling components at its Birmingham facility ... Read more »

Paper submissions for Euro PM2018, the EPMA’s annual Powder Metallurgy congress and exhibition will close on January 24, 2018. Set to take place in Bilbao, Spain, October 14-18, 2018, Euro PM2018 ... Read more »

Independent commercial testing laboratory NSL Analytical Services, Inc., Cleveland, Ohio, USA, has received scope expansion and renewed ISO/IEC 17025 accreditation for both its Metallurgical and Analytical ... Read more »

Emerging Implant Technologies GmbH (EIT), a German medical device maker focused exclusively on additively manufactured technologies for spinal application, reports that it has received full 510(k) approval ... Read more »

Kanfit 3D, Ltd., Migdal HaEmek, Israel, a manufacturer of metal additively manufactured parts, has achieved ISO 13485:2016 and ISO9001:2015 certification following a successful review conducted ... Read more »

Roush, a design and engineering service provider headquartered in Livonia, Michigan, USA, has added a Concept Laser Xline 2000R to expand its Additive Manufacturing capabilities. The Xline 2000R is the largest ... Read more »