Don’t miss Fraunhofer IFAM’s sinter-based Additive Manufacturing workshop

August 22, 2019

There’s still time to register for Fraunhofer Institute for Manufacturing Technologies and Advanced Manufacturing (IFAM)’s workshop on Sinter-Based Additive Manufacturing, which will take place at its facility in Bremen, Germany, from September 18–19, 2019. 

The workshop will discuss the challenges and opportunities for serial production using Binder Jet Additive Manufacturing and metal Fused Filament Fabrication (FFF). The programme will also feature presentations of current results from applied research on Binder Jetting and FFF, and a panel discussion on ‘Future expectations for industrialisation of sinter-based Additive Manufacturing.’ 

The Workshop Programme includes the following presentation:

  • Introduction to sinter-based Additive Manufacturing processes
    Frank Petzoldt, Fraunhofer IFAM 
  • A technology outlook on Metal Binder Jetting
    Rick Lucas, The ExOne Company 
  • Metal Binder Jetting process chain considerations
    Bastian Barthel, Fraunhofer IFAM 
  • Challenges and opportunities for Metal Binder-Jet Manufacturing
    James Sears, Carpenter Technologies Corporation
  • Material and process development in Metal Fused Filament Fabrication
    Sebastian Hein Fraunhofer IFAM 
  • Fusion Factory – an integrated Additive Manufacturing solution
    Uwe Lohse XERION BERLIN LABORATORIES GmbH 
  • Indirect metal and ceram printing as applications of material extrusion
    Thomas Janics HAGE3D GmbH 
  • Feedstock printing for serial mass production
    Mariel Díaz Castro TRIDITIVE
  • Future applications of Metal Binder Jetting from an automotive perspective
    Sven Crull Volkswagen AG 
  • Metal Binder Jetting: A cost-effective Additive Manufacturing process
    Christophe Reynaud Cetim 
  • Industrialisation of Metal Binder Jetting
    Simon Höges GKN Additive 
  • Metal parts mass production with Single Pass Binder Jetting and functional prototyping with Bound Metal Deposition
    Ric Fulop DESKTOP METAL (US)
  • Expectation on Metal Binder Jetting of a service provider
    Ingo Uckelmann MATERIALISE GmbH
  • Panel discussion: Future expectations for industrialisation of Sinter-Based Additive Manufacturing
    Matthias Schmidt-Lehr AMPower GmbH & Co. KG
  • Design aspects in Metal Binder Jetting
    Ralf Carlström DIGITAL METAL 
  • Simulation in Additive Manufacturing – approaches for Metal Binder Jetting
    Jan-Patrick Jürgens ISEMP / University of Bremen 
  • Debind and Sinter Technology in the Metal Additive Manufacturing industry
    Stefan Joens Elnik Systems, LLC 
  • 3D Screen Printing
    Thomas Studnitzky Fraunhofer IFAM

A series of lab tours will follow the event.

Prior to the workshop an additional tutorial is available, in which the fundamentals of sinter-based AM technologies will be explained in-depth.

www.ifam.fraunhofer.de/sinter-based-additive-manufacturing

Download the latest issue of Metal AM magazine

Our latest issue is now available to view online or download in PDF format.

As well as an extensive AM industry news section, this 172-page issue includes articles and reports on:

  • United Technologies: Pioneering new possibilities for Additive Manufacturing in aerospace
  • Additive Manufacturing at HP: A new ‘centre of excellence’ supports the move to volume production
  • Powder removal: The Achilles heel of powder bed-based metal Additive Manufacturing
  • Defining your digital future: The path to industrial digitalisation in Additive Manufacturing and beyond
  • DfAM insight: How to choose candidate products for AM production applications
  • VBN Components: Additive Manufacturing delivers a new generation of wear-resistant carbide parts
  • Developing an effective metal powder specification for Binder Jet Additive Manufacturing
  • Rapid qualification of new alloys for Additive Manufacturing through a holistic process chain
  • > More information

Latest news

    E-newsletter

    Sign up to our e-newsletter, sent weekly to AM professionals and end-users around the world. We'll also let you know each time a new issue of Metal AM magazine is available.

    Discover our magazine archive…

    The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:
    • Reports on visits to leading metal AM part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news
    All past issues are available to download in PDF format, in either single page format or as double-page “spreads” for viewing on large monitors. All downloads are free of charge. Go to archive...

    Connect with us

    Visit our social media channels and sign up to our e-newsletter