Claus Emmelmann to step down as Director of Fraunhofer IAPT

May 22, 2020

From left to right: Prof. Dr.-Ing. Claus Emmelmann and Prof. Dr.-Ing. Dr. h.c. Ralf-Eckhard Beyer (Courtesy Fraunhofer IAPT)

Prof. Dr.-Ing. Claus Emmelmann, Director of The Fraunhofer Research Institution for Additive Manufacturing Technologies (IAPT) is to step down from his role. 

The role of director will be held by Prof. Dr.-Ing. Dr. h.c. Ralf-Eckhard Beyer while a new director is agreed with the Executive Board of the Fraunhofer-Gesellschaft (Fraunhofer Society) and the TUHH, in order to successfully develop  the IAPT over the next ten years. 

Emmelmann commented, “I would like to thank the President of the Fraunhofer-Gesellschaft for having agreed to my request to be released from my office as head of the institute for personal reasons as of June 2020, so that I can devote myself to new challenges.”

He continued, “As acting director of the Institute for Laser and System Technologies (iLAS) at the Hamburg University of Technology (TUHH), I will continue to support the Fraunhofer IAPT in the future and will actively support the research and training of potential scientific staff at the TUHH for the Fraunhofer IAPT.”

www.iapt.fraunhofer.de

Download the latest issue of Metal AM magazine

Our latest issue is now available to view online or download in PDF format.

As well as an extensive AM industry news section, this 176-page issue includes articles and reports on:

  • Innovation and differentiation: Precious metal Additive Manufacturing in the jewellery sector
  • Unrealised potential: The story and status of Electron Beam Powder Bed Fusion
  • Freemelt AB: Open source technology to explore the potential of Electron Beam Powder Bed Fusion
  • In pursuit of perfection: A case study on how Bugatti and APWORKS leverage the full potential of AM
  • Facing obstacles to profitability in metal AM: An Operational Excellence perspective
  • Mass-production using PBF-LB: How laser beam measurements can help pave the way
  • Link3D’s ‘Additive Manufacturing Maturity Model’: Developing an agile and resilient supply chain
  • Design for Additive Manufacturing (DfAM): Binder Jetting Technology demystified
  • > More information

Latest news

    E-newsletter

    Sign up to our e-newsletter, sent weekly to AM professionals and end-users around the world. We'll also let you know each time a new issue of Metal AM magazine is available.

    Discover our magazine archive…

    The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:
    • Reports on visits to leading metal AM part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news
    All past issues are available to download in PDF format, in either single page format or as double-page “spreads” for viewing on large monitors. All downloads are free of charge. Go to archive...

    Connect with us

    Visit our social media channels and sign up to our e-newsletter

    Copy link
    Powered by Social Snap