Urwahn Engineering GmbH, Magdeburg, and wheelset and component manufacturer Roland, based in Garrel, have announced the Smart Bike Factory Made in Germany initiative. This will focus on the creation of regional ... Read more »
Divergent Technologies, based in Torrance, California, USA, reports it has been formally qualified for Additive Manufacturing US Army ground vehicle parts through the Complex AM Assembly Printing Pilot CRADA ... Read more »
The Applied Science & Technology Research Organization of America (ASTRO America), in partnership with Florida State University’s Institute for Strategic Partnerships, Innovation, Research, & Education (InSPIRE) ... Read more »
SPEE3D, headquartered in Melbourne, Australia, has announced that its metal Cold Spray Additive Manufacturing technology was selected as one of the leading AM machines during the US Navy’s Trident Warrior 25 ... Read more »
China has announced that it successfully conducted its first metal Additive Manufacturing in space in January. The experiment was performed aboard a recoverable payload developed by the Institute of Mechanics ... Read more »
ASTM International has been awarded a new project under the NATO Accelerating Interoperability and Standardization (AIS) Fund titled ‘Unmanned Surface Vehicles (USV) Standardization: Current Status and Future ... Read more »
One Click Metal, located in Tamm, Germany, has published a case study on the use of its Additive Manufacturing technology in the clinical workflow at Lerdsin Hospital, a public teaching hospital in Bangkok ... Read more »
Airbus has reported started serial integration of wire Directed Energy Deposition (DED) parts into the A350’s cargo door surround area. These Airbus-designed parts, produced for this exploratory phase ... Read more »
Researchers from Guangxi Medical University Cancer Hospital, Nanning, China, have developed a surgical technique combining additively manufactured metal prostheses and mesh patches for the treatment of distal ... Read more »
The medical division of Lincotek Group, headquartered in Rubbiano, Italy, has announced that the US Food and Drug Administration (FDA) has granted 510k clearance for the company’s SpineLinc Anterior Cervical ... Read more »
SWISSto12, a manufacturer of advanced satellite and RF systems headquartered in Renens, Switzerland, has secured €73 million in financial support from ESA member states through the HummingSat ARTES partnership ... Read more »
6K Additive, a division of 6K, based in North Andover, Massachusetts, USA, announced that it has been selected as the strategic metal powder supplier for AGF Defcom. This partnership focuses on providing high-performance ... Read more »
Czinger Vehicles, headquartered in Los Angeles, California, USA, has established a new base at MIRA Tech Park, a mobility R&D campus located in Nuneaton, UK. The move is expected to provide Czinger with direct ... Read more »
Under an EU-funded research project, the Danish Technological Institute (DTI), located in Taastrup, and Heatflow, based in Hobro, Denmark, together with Fraunhofer IWU, Germany, and Open Engineering, Belgium ... Read more »
Momentus, Inc, headquartered in San Jose, California, USA, has announced the development of an additively manufactured fuel tank, designed in collaboration with Velo3D, Fremont, California. The fuel tank ... Read more »
Velo3D, based in Fremont, California, USA, has entered into a Cooperative Research & Development Agreement (CRADA) with the US Army DEVCOM Ground Vehicle Systems Center (GVSC) to rapidly develop ... Read more »
IperionX, based in Charlotte, North Carolina, USA, has announced a project with Carver Pump Company, Muscatine, Iowa, USA, to accelerate the production of critical long lead time titanium components for naval ... Read more »
The National Center for Additive Manufacturing (NCAME) at Auburn University, Alabama, USA, has partnered with Amaero Ltd, McDonald, Tennessee, to develop the use of AM within defence sectors such as aerospace ... Read more »
Materialise, headquartered in Leuven, Belgium, has joined SONRISA, a joint project led by Liebherr-Aerospace Lindenberg GmbH and funded by the Federal Republic of Germany under the LuFoVII-1 call ... Read more »
Replique, based in Mannheim, Germany, reports it is expanding its collaboration with global rail industry manufacturer Alstom. The partnership began with projects such as door stoppers and tank caps but has now grown ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online