SPEE3D, Melbourne, Australia, reports that its WarpSPEE3D cold spray Additive Manufacturing machine will be on show at this year’s Melbourne Formula 1 Grand Prix. Located in the Versor Tech Hub ... Read more »
Siemens has purchased an ElemX metal Additive Manufacturing machine as part of a new collaboration effort with Xerox® Elem™ Additive Solutions. The new ElemX joins Siemens’ existing fleet of Additive ... Read more »
Mantle, headquartered in San Francisco, California, USA, has reported the successful implementation of its TrueShape metal Additive Manufacturing technology, following a number of recent collaborations with ... Read more »
GE has initiated testing on the first T901-GE-900, GE’s next-generation rotorcraft engine that is intended to power the US Army’s UH-60 Black Hawk, AH-64 Apache and Future Attack Reconnaissance Aircraft ... Read more »
Ultra Fine Specialty Products, LLC, an affiliate of Novamet Specialty Products Corporation, reports that its manufacturing site in Woonsocket, Rhode Island, USA, has installed capabilities to produce pilot ... Read more »
ASTM International, Conshohocken, Pennsylvania, USA, has announced seven new Research to Standards (R2S) projects that support ASTM’s Additive Manufacturing Center of Excellence (AM CoE) ... Read more »
For the last several years, Swedish companies VBN Components, based in Uppsala, and SKF, based in Göteborg, have been in collaboration to additively manufacture hard, wear-resistant steels with enhanced ... Read more »
3D Systems, Rock Hill, South Carolina, USA, has entered into a partnership with the developer of the Intelligent Surgery Ecosystem, Enhatch, Inc, headquartered in Hoboken, New Jersey ... Read more »
Biogenic Dental Corporation, a full-service dental lab based in New York, USA, has adopted metal Additive Manufacturing technology with the purchase of a dual-laser EP-M150 Laser Beam Powder Bed Fusion ... Read more »
Sandvik AB, Stockholm, Sweden, reports that its Mining and Rock Solutions division is collaborating with Boliden, a mining company also based in Stockholm, to conduct a trial to additively manufacture ... Read more »
SWISSto12, a provider of additively manufactured antenna and radio frequency (RF) system products headquartered in Renens, Switzerland, and its partner CAES (Cobham Advanced Electronic Solutions) ... Read more »
X-Bow Launch Systems Inc., a space technology company headquartered in Albuquerque, New Mexico, USA, reports that it has brought its solid-fuel rocket motors, along with a suite of small launch vehicles ... Read more »
Scientists from Nanyang Technological University (NTU), Singapore, have developed what they state is a fast, low-cost imaging process that can analyse the structure of additively manufactured parts and offer ... Read more »
Linde, a global industrial gas specialist headquartered in Guildford, Surrey, UK, has announced that it will be developing a new, dedicated laboratory to advance the understanding of the parameters and behaviour ... Read more »
Xerox® Elem™ Additive Solutions has announced the installation of a Xerox ElemX™ metal Additive Manufacturing machine at the US Department of Energy’s Manufacturing Demonstration Facility (MDF) ... Read more »
Researchers from the University of Wisconsin–Madison, USA, have developed a novel Laser Beam Powder Bed Fusion (PBF-LB) process which is said to result in metal additively manufactured parts ... Read more »
Delaser, a laser-based service bureau based in Deba, Spain, has established a spin-off company, Addideba Laser & Metal AM, which will focus on expanding metal Additive Manufacturing and its adoption ... Read more »
Sandvik AB, Stockholm, Sweden, has published its Annual Report for 2021, noting a successful year with strong delivery on its focus on growth. The group reported a total order intake of MSEK 108,898 ... Read more »
Management consultancy AMPOWER, Hamburg, Germany has published the 4th edition of its annual market report for industrial Additive Manufacturing. The AMPOWER Report 2022 analyses global industry ... Read more »
With almost sixty years of experience, FerroECOBlast® Europe, based in Dolenjske Toplice, Slovenia, is one of the global leaders in the field of surface treatment technologies. The following study, performed by the company’s R&D ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online