A number of metal Additive Manufacturing processes require the part to be cut from the build plate once finished. All residual metal left on the build plate between each build requires removal and the build ... Read more »
Sciaky, Inc., Chicago, Illinois, USA, a subsidiary of Phillips Service Industries, Inc. (PSI) has announced it will deliver its largest Additive Manufacturing machine to Turkish Aerospace Industries ... Read more »
SPEE3D, Melbourne, Australia, reports that its WarpSPEE3D cold spray Additive Manufacturing machine will be installed at Phillips Federal’s Center of Innovation, co-located at the US Army’s Rock ... Read more »
Materialise, Leuven, Belgium, and Sigma Labs, Inc, Santa Fe, New Mexico, USA, have integrated the Materialise Control Platform (MCP) with Sigma Labs’ PrintRite3D® sensor technology to create a technology ... Read more »
Manufacturing solutions provider Mimo Technik, headquartered in Carson, California, USA, has successfully met the material specifications performance for ALSi10Mg aluminium powder for Boeing ... Read more »
The Metal Powder Industries Federation (MPIF) has released the programme for PowderMet2022: International Conference on Powder Metallurgy & Particulate Materials. The conference features ... Read more »
Eplus3D, headquartered in Hangzhou, China, has launched the EP-M450H, a Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing machine with a build chamber measuring 455 x 455 x 1100 mm ... Read more »
As the Additive Manufacturing industry grows, so does the demand for high-throughput scanning electron microscope (SEM) imaging and analysis techniques such as energy-dispersive X-ray spectroscopy (EDS) ... Read more »
Farsoon Technologies, headquartered in Changsha, Hunan, China, has announced a partnership with Dubai-based Modest Company LLC, under its new Additive Manufacturing division 3DTIV Tech ... Read more »
UK-based engineering solutions provider SST Technology (SST), Eynsham, Oxford, part of Polar Technology Group, has reported an increase in production after implementing automation ... Read more »
BCN3D, Barcelona, Spain, has introduced a new method of autocalibration for its Additive Manufacturing machines. The new electronics system controls a piezoelectric sensor ... Read more »
Desktop Metal, Boston, Massachusetts, USA, reports that it has developed and qualified DM HH Stainless Steel (DM HH-SS) for use on the Production System™ platform, which utilises ... Read more »
Fives Landis Corp., a precision grinding systems specialist and part of France’s Fives Group, has collaborated with AddUp, a metal Additive Manufacturing joint venture between Fives Group ... Read more »
Foerster Group, headquartered in Reutlingen, Germany, has introduced a new, non-destructive automatable solution for testing sintered components using induction thermography ... Read more »
SLM Solutions, Lübeck, Germany, has received an order for two NXG Xll 600 metal Additive Manufacturing machines from a leading aerospace rocket company based in California, USA ... Read more »
Engineering researchers from California State University, Los Angeles, USA, and Eskisehir Osmangazi University, Turkey, have published ‘Development of a Low-Cost Wire Arc Additive Manufacturing ... Read more »
Velo3D, Inc, headquartered in Campbell, California, USA, has qualified the nickel-base superalloy powder Amperprint® 0233 Haynes® 282® for use in its Sapphire® range of metal Additive Manufacturing ... Read more »
Freemelt, Mölndal, Sweden, has received an order for a Freemelt ONE Additive Manufacturing machine from the University of Texas in El Paso, USA. The machine will be used for materials ... Read more »
Throughout 2021, 3D Systems, Rock Hill, South Carolina, USA, reports it witnessed the increasing adoption of Additive Manufacturing solutions, as organisations explored its suitability for a broader ... Read more »
After a month’s production, the new retrofitted vacuum furnace from Solar Atmospheres of Western PA, Hermitage, Pennsylvania, USA, is reported to perform with positive results ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online