AMUG presents 2021 DINO Awards
The Additive Manufacturing Users Group (AMUG) has presented its annual DINO (Distinguished INnovator Operator) Award for Additive Manufacturing expertise and service to four recipients in 2021 ... Read more »
Markforged announces revenue increase in first quarter 2021 results
Markforged, Watertown, Massachusetts, USA, has announced its results for the first quarter, ending March 31, 2021. Markforged expects to complete its previously announced merger with one (NYSE: AONE) later this summer ... Read more »
3Degrees receives funding from America Makes and Air Force Research Lab to develop database for AM
3Degrees, an Additive Manufacturing consultancy company based in Chicago, Illinois, USA, has been awarded funding as part of America Makes’ Rapid Innovation Project Call, which is supported by a $50,000 grant ... Read more »
Riven releases automated re-scaling tool to reduce part warpage
Riven, Berkeley, California, USA, has released a re-scaling tool that automatically computes re-scaling factors as compared to the original CAD, thus allowing for a more accurate end result ... Read more »
Oerlikon Metco installs gantry system for laser cladding and AM
Oerlikon Metco, headquartered in Winterthur, Switzerland, has installed a new seven-axis capable gantry system for Additive Manufacturing and laser cladding at its Swiss Laser Center of Competence ... Read more »
ExOne reports increased sales of its X1 25Pro metal AM machine in Q1 2021
The ExOne Company, North Huntingdon, Pennsylvania, USA, has reported financial results for the first quarter ended March 31, 2021, with a revenue of $13 million, a decrease of 3% from a record year-ago quarter ... Read more »
SLM Solutions and Solukon announce collaborative partnership
SLM Solutions Group AG, Lübeck, Germany, has entered into a partnership with Solukon Maschinenbau GmbH, Augsburg, Germany, in which SLM Solutions will utilise Solukon’s flagship machine, the SFM-AT800-S ... Read more »
QuesTek awarded $1.1 million for development of corrosion-resistant cold sprayable molybdenum alloys
QuesTek Innovations LLC, Evanston, Illinois, USA, has announced that it was awarded $1.1 million in Small Business Innovation Research (SBIR) Phase II funding from the US Department of Energy ... Read more »
Farsoon partners with Japan 3D Printer Co to expand sales channels
Farsoon Technologies, headquartered in Changsha, Hunan, China, has partnered with industrial solutions provider Japan 3D Printer Co. Ltd., Tokyo, to bring its Additive Manufacturing machines ... Read more »
Launcher acquires AMCM’s M 4K AM machine to advance its orbital launch vehicle strategy
Launcher, a space technology company headquartered in Hawthorne, California, USA, has acquired the M 4K Additive Manufacturing machine from AMCM GmbH, an EOS Group company, based in Starnberg ... Read more »
AM Solutions to host event series on AM’s real-world uses
AM Solutions – 3D post processing technology, a brand of Rösler Group, aims to shine a light on the possibilities of AM in a free live event series ‘Inside AM’. The English-language series, ... Read more »
SSI Sintered Specialties adds Elnik vacuum furnace to expand services
SSI Sintered Specialties, headquartered in Janesville, Wisconsin, USA, reports that, with the recent investment in an Elnik high-temperature vacuum furnace, the company has committed to expanding ... Read more »
Desktop Metal adds elastomeric solutions company to AM portfolio
Desktop Metal, Inc, Burlington Massachusetts, USA, has further expanded the scope of its Additive Manufacturing holdings with the acquisition of Adaptive3D, a provider of elastomeric AM solutions ... Read more »
Neutrons used to detect internal stress in AM parts
A team of researchers gathered from the Federal Office for Materials Research and Testing (BAM) and Siemens Energy GmbH, both based in Berlin, Germany; the Heinz Maier-Leibnitz Center, Garching ... Read more »
Bastion Cycles unveils integrated AM bicycle cockpit system
Bastion Cycles, headquartered in Fairfield, Victoria, Australia, recently showcased a fully-integrated additively manufactured bicycle cockpit system. Unveiled at the Handmade Bicycle Show Australia (HBSA) event ... Read more »
3D Pioneers Challenge finalists announced
The 3D Pioneers Challenge, an international design challenge for Additive Manufacturing and Advanced Technologies, has announced its finalists. Now in its sixth year, the focus of this year’s competition was not only ... Read more »
Eplus3D releases the EP-M300 metal AM machine
Eplus3D, Hangzhou, China, has launched its new metal Additive Manufacturing machine: the EP-M300. The new machine has the option of either single or dual lasers, at 500W or 1000W, with precise beam ... Read more »
Sakuu announces multi-material AM machine to produce EV batteries
Sakuu Corporation (previously KeraCel Inc.), San Jose, California, USA, has announced a new industrial-grade Additive Manufacturing machine that can be used in the production of e-mobility batteries ... Read more »
ExOne expands its Binder Jetting reach in Asia
The ExOne Company, North Huntingdon, Pennsylvania, USA, has collaborated with Aurora Group and two of its subsidiaries, General Integration Technology (GIT) in Taiwan and Aurora 3D in China ... Read more »
Aerojet Rocketdyne successfully tests additively manufactured RL10C-X engine for mission capability
Aerojet Rocketdyne, Los Angeles, California, USA, reports that it recently completed a successful RL10C-X altitude hot fire test series that put the engine, consisting of multiple additively manufactured parts ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- BLT: Inside the world’s largest metal Additive Manufacturing parts-production operation
- Nuclear fusion’s manufacturing challenge: Where metal Additive Manufacturing can make the difference
- From alloy design to aerospace components: Industrialising the ATI® 1700® superalloy for metal Additive Manufacturing
- From coupon to component: Qualifying wire arc DED for the US Submarine Force
- Scaling wire arc Directed Energy Deposition: Building on existing qualification evidence at WAAMathon #3
- Hidden cracks in pure tungsten: How JEOL changed the PBF-EB thermal cycle
- Titanium bellows: Engineering flexibility and testing durability with metal Additive Manufacturing
- Build plate resurfacing in metal Additive Manufacturing: A practical guide to process control
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online