EOS partners with ORNL for metal AM quality control
EOS GmbH, headquartered in Krailling, Germany, has entered into a Cooperative Research and Development Agreement (CRADA) ... Read more »
Metal Additive Manufacturing news
AML3D receives DNV accreditation for critical components in the oil & gas and marine industry
AML3D Limited, Edinburgh, Australia, has been awarded Additive Manufacturing Facility Accreditation with wire-feedstock from DNV, the Marine & Industrial Classification Society. The accreditation comprises ... Read more »
VDM Metals receives Gold status from EcoVadis
VDM Metals International GmbH, Werdohl, Germany, a leading supplier of nickel alloys and high alloyed special stainless steels and part of the Acerinox Group, has been awarded Gold status by EcoVadis for the ... Read more »
Successful first launch of X-Bow’s Bolt rocket
X-Bow Systems Inc., Albuquerque, New Mexico, USA, has confirmed the successful first launch of its Bolt Rocket at White Sands Missile range in New Mexico, USA. Bolt is the first vehicle in X-Bow’s new suite of ... Read more »
EOS installs two EOS M 290s at Automotive Trim Developments
EOS GmbH, headquartered in Krailling, Germany, has announced that Automotive Trim Developments (ATD), a UK-based group of companies focused on the engineering and manufacture of complete interior trim and electro-mechanical ... Read more »
Xiris appoints Polytec as distributor of inspection systems in Germany, Austria and Switzerland
Xiris Automation Inc., Burlington, Ontario, Canada, has announced that Polytec GmbH, Waldbronn, Germany, has been appointed an official distributor of Xiris Weld Inspection Systems for Germany, Austria ... Read more »
Stryker Corporation opens new Additive Manufacturing facility in Ireland
Medical technology company Stryker Corporation, headquartered in Kalamazoo, Michigan, USA, has opened an Additive Manufacturing facility in Anngrove, Cork, Ireland, and welcomed Taoiseach Micheál ... Read more »
voestalpine joins the Science Based Targets initiative
The voestalpine Group has announced that it is setting goals to reduce emissions in Scope 2 (energy-related) and Scope 3 (raw materials, transport, etc). These reductions will be stylistically evaluated within ... Read more »
ASM International announces key changes to its leadership structure
ASM International has announced two key changes to the Society’s leadership structure, with the promotion of Ryan Milosh to Chief Operating Officer and the addition of Kelvin Scott as Chief Information ... Read more »
MIT researchers use AI to control Additive Manufacturing perimeters
Researchers from the Massachussets Institute of Technology (MIT), Cambridge, USA, have published the paper “Closed-Loop Control of Direct Ink Writing via Reinforcement Learning” discussing the use of ... Read more »
UCLA and LLNL materials scientists receive grant to develop AM lithium-ion batteries
Materials scientists at the University of California, Los Angeles (UCLA) Samueli School of Engineering, led by Bruce Dunn and Morris Wang, along with colleagues at Lawrence Livermore National Laboratory ... Read more »
Bosch adds two SLM 500 machines to boost Additive Manufacturing production
SLM Solutions Group AG, headquartered in Lübeck, Germany, has announced that two SLM®500 metal Additive Manufacturing machines have been installed at Robert Bosch GmbH’s 3D-MPC Manufacturing ... Read more »
RHP-Technology to hold AM and special materials open house
RHP Technology will be hosting an open house focusing on Additive Manufacturing and smart materials from its location in Seibersdorf, Austria, on October 20–21. This event will host SBI GmbH ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online