Spain’s Royal Academy of Engineering inducts Professor José Manuel Torralba
v ... Read more »
Metal Additive Manufacturing companies & markets news
Aurora Labs restructures board to target defence growth
Aurora Labs Ltd (A3D), based in Canning Vale, Australia, has announced a strategic board restructure to support growth in the defence sector. Succeeding Grant Mooney, David Trimboli has been named chairman ... Read more »
Germany to invest €35 billion in space defense by 2030
Germany’s Minister of Defense, Boris Pistorius, announced at Germany’s third annual Space Congress, held in Berlin on September 25, 2025, that Germany plans to invest €35 billion in space-related defence initiatives ... Read more »
AM@Chalmers Additive Manufacturing hub launched at Chalmers University
Chalmers University of Technology, located in Gothenburg, Sweden, has officially launched AM@Chalmers and the WISE Additive node, an open research infrastructure dedicated to Additive Manufacturing. ... Read more »
TBGA to provide support to EWI’s Additive Manufacturing Consortium
EWI Inc, headquartered in Columbus, Ohio, USA, has announced a strategic partnership with The Barnes Global Advisors (TBGA) to enhance the resources and expertise available to members of its Additive Manufacturing ... Read more »
ASTRO America awarded $1.66M to lead defense AM inspection project
The Applied Science & Technology Research Organization of America (ASTRO America), based in Bethesda, Maryland, USA, has announced its selection as project lead for a $1.66 million award under the Quality Test ... Read more »
Mimecrisa launches CDTI-backed R&D project on nickel-enhanced alloys
Ecrimesa Group, headquartered in Santander, Spain, has shared that its Mimecrisa has launched a new Research and Development and Innovation (R&D&I) project in collaboration with the University of Castilla-La Mancha (UCLM), Ciudad Real, Spain, with the support of the Centre for the Development of Industrial Technology (CDTI), Madrid, Spain. ... Read more »
Melody Delpazir joins Ultra Fine Specialty Products as Metallurgical Engineer
Ultra Fine Specialty Products, LLC, an affiliate of Novamet Specialty Products Corporation based in Woonsocket, Rhode Island, USA, has announced the addition of Melody Delpazir as Metallurgical Engineer ... Read more »
Velo3D’s Rapid Production Solution earns AS9100D aerospace certification
Velo3D, Inc, headquartered in Fremont, California, USA, has announced that it has achieved AS9100D certification for its Rapid Production Solution (RPS) Quality Management System. This certification, issued by Eagle ... Read more »
INDO-MIM seeks to raise $113M via IPO
INDO-MIM Ltd, headquartered in Bengaluru, India, is reported to have filed for an initial public offering (IPO) of shares to raise up to Rs 1,000 crore (approx $113 million) via fresh issue. ... Read more »
Hubb to acquire 3D Systems’ Oqton and 3DXpert software platforms
3D Systems, Rock Hill, South Carolina, USA, has announced that following a comprehensive strategic review of its major software platforms, it intends to divest its Oqton Manufacturing Operating System (MOS) ... Read more »
Gevorkyan reports 11% revenue growth in first half of 2025
Gevorkyan a.s., headquartered in Vlkanová, Slovakia, has announced selected financial and operating results for the six months ending June 30, 2025, as well as providing updated full-year 2025 and five-year ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- Inside Nikon’s metal Additive Manufacturing strategy, Part 1: Hamid Zarringhalam on building a new growth pillar
- Inside Nikon’s metal Additive Manufacturing strategy, Part 2: Scaling industrial production in Long Beach
- Steel reinvented: Colnago’s Steelnovo and the search for the perfect modern road bike
- Additive Manufacturing in US defence logistics: From technical progress to operational capability
- Additive Manufacturing Strategies 2026: Strategy without the strategy-speak in a maturing AM industry
- Wire-based Directed Energy Deposition in large-scale metal Additive Manufacturing: Choosing the right process
- Industrialising Haynes® 282®: Laser Powder Directed Energy Deposition for high-temperature performance
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online