University of North Texas aims to boost critical military manufacturing with Additive Manufacturing

August 1, 2023

August 1, 2023

UNT faculty members Herman Shen (left) and Hector Siller (right) (Courtesy UNT)
UNT faculty members Herman Shen (left) and Hector Siller (right) (Courtesy UNT)

The University of North Texas’ (UNT) College of Engineering, Denton, Texas, USA, is currently conducting research for the US Army Combat Capabilities Development Command (DEVCOM) Army Research Laboratory (ARL). The research is focused on analysing Laser Beam Powder Bed Fusion (PBF-LB) AM using equipment located in UNT’s Center for Agile and Adaptive Additive Manufacturing.

Herman Shen, chair of UNT’s Department of Mechanical Engineering, and Associate Professor Hector Siller have been awarded an $800,000 grant from DEVCOM ARL. The grant was awarded through a merit competition administered under the policy and guidance of the Office of the Under Secretary of Defense for Research and Engineering. Shen and Siller will lead teams of UNT undergraduate and postdoctoral researchers to assist with the project. The project aims to develop more reliable and durable replaceable parts that can be produced on military vessels in the future.

Subscribe to our weekly newsletter
Sign up

The military has reportedly shown interest in PBF-LB to accelerate the manufacturing process. “Submarine or aircraft carriers go out to sea for up to six months sometimes,” Shen explained. “If they need repairs, they can’t just easily call someone to send the parts. They have to build their own.”

In order to minimise the risk of manufacturing defects, Shen will be researching the process in reverse in order to pinpoint where defects first form. The team will examine the end product and test for any defects or deformations in the parts. They will then use artificial intelligence to identify where the defect could have originated.

Siller and his team will also examine the entire process, including the analysis of fabrication plans, microstructure assessments, and monitoring processes. The goal is to gain a comprehensive understanding of the materials’ behaviour during manufacturing and post-production testing.

After using their comprehensive findings to identify areas for improvement, Shen and Siller will incorporate those changes and begin the process again. “We will have feedback from that performance, reform the methods and then have a closed loop of improvement,” shared Siller.

The grant will span over four years, with progress reports being submitted annually. The manufacturing and testing will take place at UNT’s Discovery Park and a researcher at Wright-Patterson Air Force Base will reportedly also visit to evaluate their testing process.

“Aerospace components will most likely be made using this technology in the future,” stated Siller. “It’s able to fabricate complex shapes such as turbine blades or engine parts. The nature of this research is to make sure those parts are reliable.”

Download Metal AM magazine
UNT faculty members Herman Shen (left) and Hector Siller (right) (Courtesy UNT)
August 1, 2023

In the latest issue of Metal AM magazine

Download PDF

Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:

  • Kennametal: The story of the successful commercialisation of AM hardmetal and steel solutions
  • General Atomics Aeronautical on metal Additive Manufacturing’s place at the centre of the digital manufacturing revolution
  • Adrian Keppler on Additive Manufacturing: An insider’s assessment from the outside
  • Metal AM’s journey to industrialisation: Are we there yet? And what does the destination even look like?
  • A stronger future, layer by layer: How next-generation software will drive adoption of metal AM
  • Volkmann: Making the case for the complete automation of powder handling in AM
  • Metal AM on an industrial scale: GKN Additive draws on decades of sintering expertise to commercialise Binder Jetting
  • International Conference on Electron Beam Additive Manufacturing: Highlights from EBAM 2023

The world of metal AM to your inbox

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Sign up

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Looking for AM machines, metal powders or part manufacturing services?

Discover suppliers of these and more in our comprehensive advertisers’ index and buyer’s guide, available in the back of Metal AM magazine.

  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data
View online
Share via
Copy link
Powered by Social Snap