Materialise NV, headquartered in Leuven, Belgium, has introduced Mimics Flow Case Management, a complete case management system which allows users to organise, track and collaborate. The software is intended ... Read more »
VBN Components, Uppsala, Sweden, has announced it is supporting a new industrial PhD collaboration. The company maintains a longstanding collaboration with the Ångström Laboratory at Uppsala University ... Read more »
Aerospace and defence technology company Northrop Grumman Corporation, headquartered in Falls Church, Virginia, USA, has successfully conducted a full-scale static test fire of a new solid rocket motor ... Read more »
6K Additive, a division of 6K Inc based in Andover, Massachusetts, USA, has announced the initiation of a $50 million investment programme which will expand its current capacity and metal processing capabilities ... Read more »
Laser Additive Solutions Ltd (LAS), a provider of laser processing and Additive Manufacturing services based in Doncaster, UK, has successfully installed a Trumpf TruPrint 3000 Laser Beam Powder Bed Fusion (PBF-LB) ... Read more »
AM Solutions – 3D post processing technology, part of Rösler Oberflächentechnik headquartered in Untermerzbach, Germany, has installed its S1 post-processing unit, for use with parts produced via Powder Bed Fusion ... Read more »
The University of Oklahoma, based in Norman, Oklahoma, USA, recently celebrated the opening if its Sooner Advanced Manufacturing Lab. The new facility has been established to enable research and workforce ... Read more »
Titomic Limited, based in Brisbane, Australia, has announced the sale of two D523 low-pressure Cold Spray Additive Manufacturing machines, one to a company based in Kalgoorlie, Australia, and the other ... Read more »
Tekna Holding ASA, Sherbrooke, Quebec, Canada, has announced the extension of a CA $20 million contribution agreement with the Canadian federal government’s Strategic Innovation Fund (SIF) programme ... Read more »
Indo-MIM, headquartered in Bangalore, India, showcased its Metal Injection Moulding (MIM) and metal Additive Manufacturing capabilities, as well as its range of metal powders and other manufacturing technologies ... Read more »
In partnership with Replique GmbH, based in Mannheim, Germany, transport solutions provider MAN Truck & Bus is now using Additive Manufacturing to manufacture spare parts at point of need ... Read more »
AKL’24, the International Laser Technology Congress, organised by Fraunhofer Institute for Laser Technology (ILT), Aachen, Germany, will take place in Aachen from April 17-19, 2024. In addition to the core ... Read more »
The European Powder Metallurgy Association (EPMA) has announced that entry has opened for its 2024 Powder Metallurgy Component Awards. Entry to the competition is open to all those who manufacture ... Read more »
Velo3D, Inc, based in Campbell, California, USA, has announced its Sapphire family of metal Additive Manufacturing machines are the first to achieve the US Department of Defense’s Green-level ... Read more »
Researchers at Washington State University (WSU) have developed a novel surgical implant using Additive Manufacturing that was reportedly able to eliminate 87% of bacteria causing staph infections during laboratory tests ... Read more »
Sweden’s Höganäs AB reports it has appointed Robert Hermans to its board of directors. Currently serving as CEO at IPCO, an industrial company delivering solutions within the process industry and wholly ... Read more »
Delft University of Technology (TU Delft), the Netherlands, recently opened a new Materials for Additive Manufacturing lab, complementing the existing AM labs on it campus. This new lab will enable ... Read more »
Spinal Elements, based in Carlsbad, California, USA has announced the full commercial launch of its Ventana additively manufactured interbody implant portfolio. The range includes the Ventana C Anterior Cervical ... Read more »
Additive Manufacturing Solutions Ltd. (AMS), located in Burscough, Lancashire, UK, has announced a collaboration with the UK Ministry of Defence’s (MOD) Defence Equipment Sales Authority (DESA) ... Read more »
SWISSto12, based in Renens, Switzerland, has reported a successful business year in which the company secured a major contract with Inmarsat, doubled its team, opened new production facilities, secured financing ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online