BMW Group expands ATLIX partnership with xBUILD 5000 metal AM machines

The BMW Group is expanding its collaboration with ATLIX, based in Schio, Italy, through the planned installation of ATLIX xBUILD 5000 Laser Beam Powder Bed Fusion (PBF-LB) machines at the automotive manufacturer’s Additive Manufacturing Campus in Oberschleissheim, Germany. The machines are intended to support the production of aluminium components for prototyping and series applications.
The xBUILD 5000 features four 1.5 kW lasers operating simultaneously across the build area and a square build platform, providing a build volume of 500 × 500 × 600 mm within a compact machine footprint.

Designed for continuous, unattended operation, the xBUILD 5000 uses a linear production workflow that automates the build cycle. Empty build cylinders are inserted on one side of the machine and loaded automatically. The system then performs calibration and starts production without further operator intervention. Once a build is complete, the cylinder is automatically sealed gas-tight and unloaded on the opposite side, where it cools independently while the next cylinder is loaded. ATLIX states that production can restart within fifteen minutes. An automatic multi-laser alignment system is also intended to maintain consistent part quality across the build area.
According to ATLIX, the higher laser power increases build rates, while the square build platform improves build utilisation. Closed-loop automation is designed to minimise downtime, including overnight and at weekends, when builds might otherwise finish without an operator present to restart production. The compact machine footprint also allows greater output per square metre of production floor space. The company states that these features contribute to a significant reduction in cost per part, supporting the economic viability of PBF-LB Additive Manufacturing for automotive production.

“Our longstanding collaboration with the BMW Group provides an ideal foundation for applying the capabilities of the xBUILD 5000 in an industrial production environment,” stated Matthias Himmelsbach, CEO of ATLIX. “The xBUILD 5000 was designed exactly for this purpose: fully automated lights-out production at the lowest possible cost per part, combined with repeatable quality and stable processes. We look forward to further strengthening and expanding this collaboration, which began in 2019 with the research project ‘IDAM’ (Industrialization and Digitalization of Additive Manufacturing), where the benefits of robust automation were first demonstrated.”





























