DN Solutions and Addiguru demonstrate AM defect detection at Formnext

NewsSoftware
November 18, 2026
Addiguru is displaying its automated defect detection on DN Solutions’ PBF-LB machine (Courtesy Addiguru)
Addiguru is displaying its automated defect detection on DN Solutions’ PBF-LB machine (Courtesy Addiguru)

DN Solutions, Changwon, South Korea, and Addiguru, New Orleans, Louisiana, USA, are demonstrating automated defect detection at Formnext 2026 using build data from a DN Solutions DLX metal AM machine. The demonstration focuses on identifying potential defects earlier in the manufacturing process, with the aim of reducing the time and costs associated with subsequent processing and inspection.

Building on decades of experience in CNC machining, DN Solutions expanded into metal Additive Manufacturing with its DLX series of Laser Beam Powder Bed Fusion (PBF-LB) machines, providing opportunities to integrate additive and subtractive manufacturing processes.

The companies state that post-build operations can account for 30–50% of the cost of an additively manufactured component. Defects identified only after heat treatment, CNC machining and final inspection can therefore result in significant additional costs.

At Formnext, Addiguru’s automated in-situ monitoring platform analyses individual layers of the powder bed via images recorded during a build on a DN Solutions DLX machine. The software identifies potential defects and tracks them throughout the build.

Manually reviewing thousands of layer images can require hours of engineering time. Addiguru’s platform highlights areas of concern and can notify users when potentially critical issues are detected.

For manufacturers producing high-value components, earlier identification of potential defects could help avoid unnecessary machining and inspection. This is particularly relevant where computed tomography (CT) scanning or other costly non-destructive inspection methods are required. In-situ monitoring is not intended to replace established quality assurance processes, but can provide information to help determine where further investigation may be necessary.

Nuclear Fusion’s Manufacturing Challenge Where Metal Additive Manufacturing Can Make The Difference

Following Formnext, DN Solutions and Addiguru are evaluating the integration of additional sensor and machine data alongside the powder bed images.

“A defect found during the build costs a reprint. Found after five-axis finishing and CT, it costs the reprint plus every machine hour and inspection that went into the part,” stated Dr Vino Suntharakumaran, Vice President Additive Manufacturing at DN Solutions. “We want that information as early as possible, in the same workflow that takes a preform to a finished part. Formnext is where we start testing this with Addiguru.”

Shuchi ‘SK’ Khurana, CEO of Addiguru, added, “The value is quite simple. If we can identify a potential problem during the build, why wait until after machining and expensive inspection to find it? DN Solutions already understands the complete journey from Additive Manufacturing through to the finished component. By bringing our monitoring technology into that process, we help manufacturers find problems earlier, make better decisions and avoid unnecessary cost.”

DN Solutions is exhibiting in Hall 12.0, Stand D31, and Addiguru in Hall 12.0, Stand G118

www.addiguru.com

www.dn-solutions.com

GET THIS ISSUE:  PDF  |  VIEW ONLINE  |  BUYER’S GUIDE
NewsSoftware
November 18, 2026

TRUSTED CONTENT. TARGETED AUDIENCE

Advertise with Metal AM and access a global base of 50,000+ AM professionals.

Contact Jon Craxford: [email protected]

Request a Media Pack
  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data

Don’t miss a thing – register for our newsletter

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Register now

Join 40,000+ other AM professionals – follow us online

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap