Nikon SLM Solutions introduces new MACHX range at Formnext

EquipmentNews
November 17, 2026
The MACHX family will comprise three machines sharing a common architecture and is available with up to 8 kW total laser power (Courtesy Nikon SLM Solutions)
The MACHX family will comprise three machines sharing a common architecture and is available with up to 8 kW total laser power (Courtesy Nikon SLM Solutions)

Nikon SLM Solutions, based in Lübeck, Germany, has introduced MACHX, a new family of metal Additive Manufacturing machines using Laser Beam Powder Bed Fusion (PBF-LB) for series production. Available with three build envelopes, the MACHX range offers up to 8 kW of total laser power, an optional cylinder exchange system enabling 25-minute changeovers, and a compact footprint.

The company states that MACHX has been developed in response to changing priorities in metal AM, with manufacturers increasingly focused on production output relative to floor space, consistency between builds and the ability to increase capacity, rather than build speed alone. Nikon SLM Solutions refers to this measure of production output per square metre of factory floor space as ‘throughput density’.

The MACHX family comprises three machines sharing a common architecture, software and process:

  • The MACHX 450 features a 450 × 450 × 450 mm build envelope for general production applications
  • The MACHX 450C extends the Y-axis to provide a 450 × 600 × 450 mm build envelope, targeting automotive and other applications involving long, flat components
  • The MACHX 450E increases the Z-axis to provide a 450 × 450 × 1,000 mm build envelope, accommodating taller components such as rocket engine thrust chambers

The shared architecture allows process parameters and expertise developed on one machine to be transferred across the range.

The modular design allows users to increase capacity by adding laser power, automation and additional machines as production requirements grow. Laser and optics packages can also be upgraded after installation, while independently validated modules allow individual units to be serviced without taking the entire machine out of production.

Nikon SLM Solutions launched the MACHX at Formnext 2026 (Courtesy Metal AM magazine)
Nikon SLM Solutions launched the MACHX at Formnext 2026 (Courtesy Metal AM magazine)

An optional cylinder exchange system enables the next cylinder to be preheated outside the build chamber while the current build is in progress. Nikon’s layer-surface monitoring technology then automatically levels the build platform and verifies the first powder layer, allowing the next build to begin 25 minutes after completion of the previous one.

Interfaces for automated material handling and shared depowdering enable multiple machines to operate as a single production cell, while a 230 L Universal Powder Tank supports extended production runs. The MACHX 450E provides approximately 200 L of build volume within a floor area of around 13 m², offering the potential to increase production capacity within existing facilities.

MACHX offers three laser configurations: four or eight 1 kW Gaussian lasers, or four 2 kW lasers with selectable beam-shaping options to accommodate different materials and applications.

The machines incorporate a new generation of optics developed jointly by Nikon optical engineers and Nikon SLM Solutions engineers, capable of controlling up to 2 kW per laser. Zoom and defocus functions enable the beam size to be adjusted between 80 and 760 µm during a build, while advanced galvanometer control is intended to support productivity and dimensional accuracy.

Nuclear Fusion’s Manufacturing Challenge Where Metal Additive Manufacturing Can Make The Difference

Thermal management is addressed through interchangeable build plate packages designed for different operating temperatures. A low-temperature package provides active cooling between 80 and 200°C, with approximately eight times the cooling performance of previous systems, while a mid-temperature package operates between 200 and 450°C. Sensors beneath the build plate, a liquid-cooled process chamber and thermal conditioning of the built parts are intended to maintain a consistent thermal history across the build plate.

MACHX is also the first machine family to incorporate SLMX, Nikon SLM Solutions’ adaptive process ecosystem. This combines the system’s thermal architecture, PanX simulation, build processing, optical tomography, advanced optics and process intelligence, with the aim of maintaining consistent performance across successive builds, from the first to the thousandth.

“Customers are no longer asking whether Additive Manufacturing is possible. They are asking how fast it can run, how reliably it can perform, and how confidently it can scale,” stated Sam O’Leary, Chief Executive Officer of Nikon SLM Solutions. “MACHX is our answer to all three. It is built for the parts most of the industry actually makes, and for the factories that need to make many more of them. Others name machines. We name outcomes.”

Simon Merkt-Schippers, Executive Vice President Product Management at Nikon SLM Solutions, added, “We designed MACHX so that the first system a customer buys is the start of their production line, not the limit of it. The same platform runs across three build envelopes, lasers and automation can be added as volumes grow, and every system added makes the whole fleet more productive. That is what throughput density means on a real factory floor.”

MACHX will be displayed for the first time at Formnext 2026, taking place in Frankfurt, Germany, November 17–20, in Hall 12.0, Stand D119. Visitors will be able to view the machine, its three build envelopes and components produced using MACHX.

nikon-slm-solutions.com

GET THIS ISSUE:  PDF  |  VIEW ONLINE  |  BUYER’S GUIDE
EquipmentNews
November 17, 2026

TRUSTED CONTENT. TARGETED AUDIENCE

Advertise with Metal AM and access a global base of 50,000+ AM professionals.

Contact Jon Craxford: [email protected]

Request a Media Pack
  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data

Don’t miss a thing – register for our newsletter

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Register now

Join 40,000+ other AM professionals – follow us online

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap