ATLIX and DHR demonstrate robotic automation for metal AM at Formnext

ATLIX, headquartered in Schio, Italy, and DHR Engineering, based in Plovdiv, Bulgaria, have collaborated on a robotic automation concept for the ATLIX xBUILD 3000, an industrial metal Additive Manufacturing (AM) machine designed for full-field multilaser capability. The two companies will present their collaboration at Formnext 2026, taking place November 17-20 in Frankfurt, Germany.
Formerly TRUMPF Additive Manufacturing, ATLIX is a specialist in Laser Beam Powder Bed Fusion (PBF-LB) technology and a provider of industrial Additive Manufacturing machines, including the xBUILD 3000. The xBUILD 3000 is a rebrand of the TruPrint 3000, as reported by Metal AM in September.

It offers a 300 × 300 × 400 mm build volume, alongside full-field multilaser technology with up to 2 × 700 W, allowing both lasers to reach the entire build plate. The xBUILD 3000’s automatic multilaser alignment checks the lasers every two layers with 40 µm accuracy, according to the company.
DHR has developed a robotic automation concept for the xBUILD 3000’s production workflow, both inside and outside the machine. An industrial robot is designed to handle work cylinder loading and unloading, supply cylinder exchange, recovery container transfers and powder refilling at the sieving station. Integrated with a custom lid system inside the machine, the robotic cell is intended to enable transitions between builds without manual intervention.
The resulting production concept targets up to 98% machine utilisation, with the aim of reducing changeover times and machine downtime, particularly in high-mix, low-volume production. The cell is designed to scale from a single automated machine to a production line incorporating multiple machines and a post-processing station.

“Scaling metal AM takes more than faster machines: every machine hour has to count,” said Matthias Himmelsbach, CEO, ATLIX. “With the xBUILD 3000, we deliver the productivity and process stability that series production requires. Together with DHR, we are showing how automation can unlock that potential around the clock. This concept is our vision of where Additive Manufacturing is heading: production that scales with our customers’ demand.”
“At Formnext, the spotlight is usually on the machine itself. Together with ATLIX, we want to show the other half of the story: what happens around it, where metal AM production really scales,” added Dimitar Hristakiev, Founder and CEO, DHR Engineering.
A concept demonstration of the ATLIX xBUILD 3000 with DHR’s automation will be exhibited at Formnext, Hall 12, Booth D99.





























