Wickert introduces multifunctional gripper for multi-layer components

May 4, 2021

With the help of cameras and an image processing system, the multifunctional gripper detects both the inside diameter and position of components (Courtesy Wickert Maschinenbau GmbH)

Wickert Maschinenbau GmbH, Laundau, German, has developed a compact, setup-free, multifunctional gripper for the handling of multilayer-stacked or chaotically-deposited components with layer separation. Due to its flexibility, the multifunctional gripper is suited to a variety of different applications throughout handling, automation and machining operations.

The system is able to decide on the suitability of workpieces for further processing, via a plausibility check, and components that are unsuitable or falsely gripped are detected and do not undergo further processing.

The gripper utilises two to six fingers with variable lift ranges to pick up workpieces and lift them out of the transport container. As soon as one layer has been completely emptied, the separation sheet is removed by three close-fitting, extendable vacuum suction elements on the gripper arm. The system is then able to access the next level of components.

The multifunctional gripper can be used without additional programming: the diameter of the gripped component is permanently monitored by a position sensor system and the PLC compares this value with the gripper diameter, which also has a tolerance range configured in a ‘recipe’ stored centrally in the PLC.

The system is available with two different gripper types: A group of two to six fingers picks up workpieces and lifts them out of the transport container (on left). As soon as a batch is completely empty, the layer separation sheet is removed by means of three vacuum suction elements also attached to the gripper arm. The system is then able to access the next level of components (Courtesy Wickert Maschinenbau GmbH)

The standard version of the gripper arm has a height of 730 mm and, with a diameter of just 160 mm, the gripper is still able to precisely pick and place small components even when they are tightly packed on a pallet, or located in the corners of pallets. If a workpiece has slipped into a position that is not accessible to the gripper, the fingers are able to move it back into a position where it can be reached.

The surfaces which come into contact with the parts needed to be gripped are equipped with a wear-resistant rubber coating which ensures a high friction value. In accordance with individual requirements, the gripper pressure can be set individually to a value between 460 N and 3000 N, aiding in safe grips on both heavy and light, delicate components. As an option, the gripper fingers can also be fitted with an interlocking under-grip.

In the standard version, the gripper is designed for rotation-symmetrical workpieces with inside diameters from 40 mm to 256 mm and weights from 100 g to 20 kg. For other requirements, the parameters can be configured individually. Grippers with larger arms, for combined outside and inside gripping, are also available.

With the use of cameras, image processing and an integrated position sensor system, the gripper detects both the inside diameter and position of components. It also monitors the remaining quantities and detects when a layer of components is empty.


Download the latest issue of Metal AM magazine

Our latest issue is now available to view online or download in PDF format.

As well as an extensive AM industry news section, this 204-page issue includes articles and reports on:

  • Mauro Antolotti and BEAMIT: The story of Italy’s leading AM parts producer and its founder’s view on the industry
  • Why do we need Women in 3D Printing? The what, the who, and the why of the blog that became a movement
  • The need for speed, and how the right powder can reduce AM part production costs by 50%
  • Metal Additive Manufacturing:
    Why standards lay the foundation for continued industry growth
  • The advantages of Additive Manufacturing for the processing of platinum group metals
  • Obstacles to the adoption of metal AM by small- and medium-sized enterprises
  • Additive Manufacturing of aluminium parts by Directed Energy Deposition: Possibilities and challenges
  • Euro PM2020 technical review: Advances in process control for metal Binder Jetting (BJT)
  • > More information

Latest news


    Sign up to our e-newsletter, sent weekly to AM professionals and end-users around the world. We'll also let you know each time a new issue of Metal AM magazine is available.

    Discover our magazine archive…

    The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:
    • Reports on visits to leading metal AM part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news
    All past issues are available to download in PDF format, in either single page format or as double-page “spreads” for viewing on large monitors. All downloads are free of charge. Go to archive...

    Connect with us

    Visit our social media channels and sign up to our e-newsletter

    Copy link
    Powered by Social Snap