Velo3D, Inc, Fremont, California, USA, has announced an expanded partnership with Innovative Rocket Technologies (iRocket), an aerospace company developing 100% reusable launch vehicles. This partnership ... Read more »
INDO-MIM, headquartered in Bengaluru, India, has qualified OptiPowder Ni718 from Continuum Powders, based in Houston, Texas, USA, using its HP Metal Jet S100 Binder Jetting (BJT) Additive Manufacturing machines. ... Read more »
Quadrus Corporation’s Advanced Manufacturing Division (QAMD), based in Huntsville, Alabama, USA, has announced the development of a Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing process ... Read more »
Australia’s Additive Manufacturing Cooperative Research Centre (AMCRC) celebrated its official launch on October 22, 2025. Established with $57.5 million in Commonwealth Government funding through the Department ... Read more »
The deadline for the call for papers for the rapid.tech 3D 2026 AM Science Forum, organised by Messe Erfurt GmbH, is fast approaching. The forum is expected to feature a total of 18 presentation slots across all three ... Read more »
Nano Dimension, headquartered in Waltham, Massachusetts, USA, has announced that John Brenton, the company’s current Vice President of Global Finance and Corporate Controller, will become its Chief Financial Officer ... Read more »
ASTM International and CECIMO, the European Association of the Machine Tool Industries and Related Manufacturing Technologies, signed a Memorandum of Understanding (MoU) at the ASTM International Conference ... Read more »
Elmet Technologies, headquartered in Lewiston, Maine, USA, has launched a fully optimised website dedicated to its range of high-performance refractory metal powders. The site features updated product information ... Read more »
Metalysis, based in Rotherham, UK, reports it has added two more Gen 2 demonstration units, doubling its capacity to meet increased demand from advanced industries, including electronics, hypersonics, defence ... Read more »
Continuum Powders, based in Houston, Texas, USA, and HP Additive Manufacturing Solutions have entered into an agreement to accelerate the development of high-performance alloys using HP’s Metal ... Read more »
AML3D Limited, headquartered in Edinburgh, Australia, has announced an order, valued at approximately $2.9 million, for two custom ARCEMY Additive Manufacturing machines from Huntington Ingalls ... Read more »
The Metal Powder Industries Federation (MPIF) has shared that its Industry Development Board is continuing with its University Outreach Program. Launched earlier this year, the Outreach Program ... Read more »
MBDA, headquartered in Le Plessis-Robinson, France, has additively manufactured a complex multifunctional component used to house vital electronic equipment in next-generation missile systems ... Read more »
The HANBIT-Nano SPACEWARD mission marks the company’s first commercial launch and will carry customer satellites and payloads into low-Earth orbit (LEO) at an altitude of 300 km. Under contracts ... Read more »
Farsoon Europe GmbH has opened its new Additive Manufacturing Innovation Centre in Sindelfingen, Germany. The facility serves as the company’s European headquarters and establishes a hub for industrial Additive ... Read more »
This year, Space Tech Expo Europe will be celebrating its tenth anniversary in Bremen, Germany, from November 18-20. Organisers expect this year’s event to welcome over 10,000 industry professionals alongside ... Read more »
Following its announcement of a non-brokered private placement on the Toronto Stock Exchange (TSX), PyroGenesis Inc., headquartered in Montreal, Quebec, Canada, has completed the first tranche of its First ... Read more »
Titomic Limited, headquartered in Brisbane, Australia, has been selected as one of five companies to join the second cohort of the CRP DefenseTech Accelerator, a collaboration between the USA’s ... Read more »
MX3D, based in Amsterdam, the Netherlands, has been selected by Framatome to provide two advanced Directed Energy Deposition (DED) robotic systems for its new Additive Manufacturing facility in Romans- ... Read more »
At Formnext 2025, ARCWAY will present the new ATO ultrasonic metal atomiser, developed by 3D Lab, headquartered in Warsaw, Poland, alongside equipment for powder handling and processing. This ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online