Researchers from the ATILA Project, funded by Spain’s Ministry of Science and Innovation, the European Union, and the State Research Agency, have announced another significant technological breakthrough, reflecting ... Read more »
AM Forum Berlin has confirmed more speakers for the tenth anniversary of AM Forum 2026, scheduled to take place March 10-11, 2026, at ECC Berlin, Germany. Building on the previously announced speakers ... Read more »
At Formnext 2025, Wayland Additive, headquartered in Huddersfield, UK, has announced it will highlight its collaboration with the UK Royal Air Force (RAF), which saw the RAF install a Calibur3 Additive Manufacturing ... Read more »
XJet, Rehovot, Israel, has announced the Carmel Pro, a metal and ceramic Additive Manufacturing machine based on the company’s NanoParticle Jetting (NPJ) technology, a proprietary form of Binder Jetting ... Read more »
IperionX, based in Charlotte, North Carolina, USA, has released its quarterly report for the period ending September 30, closing with $79.2 million in cash. During Q3, the company stated that all planned major ... Read more »
Skyrora, headquartered in Cumbernauld, UK, has announced its participation as a prime contractor in the European Space Agency’s (ESA) General Support Technology Programme (GSTP). The project will focus on the Additive ... Read more »
Angelelli Automobili, based in Rome, Italy, recenlty showcased a number of additively manufactured elements of its prototype D1 hypercar. On show was Titanclaw, a brake calliper with integrated wheel hub, engineered ... Read more »
Amazemet, based in Warsaw, Poland, has announced the integration of an advanced artificial intelligence model to fully automate its rePOWDER ultrasonic atomisation machine. The move is intended to address the need ... Read more »
Shanghai Hanbang 3D Tech Co, Ltd (HBD), headquartered in Shanghai, China, reports it has collaborated with Hi-Light Titanium Bicycles to integrate industrial-grade metal Additive Manufacturing into titanium bicycle ... Read more »
Additive Industries, Eindhoven, the Netherlands, has launched the MetalFab 420K, a modular Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing machine designed to enable higher productivity rates ... Read more »
In June this year, the Court of Parma initiated the liquidation of BEAMIT SpA, headquartered in Fornovo di Taro, Parma. The Italian company, which has been active in metal powder Additive Manufacturing for over 25 years ... Read more »
During his keynote at the UP.Summit, Daniel Jablonsky, Chairman and CEO of Ursa Major, highlighted the capabilities of its Draper engine, explaining that its design represents a complete shift in how the company ... Read more »
Plastometrex, a developer of mechanical testing solutions based in Cambridge, UK, announced that its ASTM E3499-25 for Profilometry-based Indentation Plastometry (PIP) standard has been approved ... Read more »
Researchers at Washington State University, Pullman, Washington, USA, have reported in Nature Communications on the manufacture of flexible antenna arrays produced via Additive Manufacturing ... Read more »
Rowan University, based in Glassboro, New Jersey, USA, has shared that its Digital Engineering Hub (DEHub) is combining smart technology and advanced manufacturing methods in a new laboratory ... Read more »
It has been announced that Trumpf’s former Additive Manufacturing business will officially debut under the new name ATLIX at Formnext 2025. This name change is said to mark the beginning of a new chapter for the AM ... Read more »
ValCUN, headquartered in Ghent, Belgium, has announced the launch of REMUS 1.0, its next-generation industrial printhead incorporating the company’s wire-based Molten Metal Deposition (MMD) Additive Manufacturing ... Read more »
German companies amsight GmbH, Hamburg, and Qualified AM, Wielenbach, have released a whitepaper titled ‘Quality Management and Certification in Additive Manufacturing’. The paper is intended to provide a comprehensive ... Read more »
The University of Missouri College of Engineering (Mizzou Engineering), located in Columbia, Missouri, USA, has announced the acquisition of a TruPrint 2000 Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing ... Read more »
MetalWorm, based in Ankara, Türkiye, has shared further details of one of its latest Wire Arc Additive Manufacturing (WAAM) machines scheduled for delivery to the Instituto Federal do Maranhão (IFMA), in São Luís, Brazil ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online