Melrose Industries PLC, UK, has announced its interim results for the six months ended June 30, 2020. The group, which includes GKN Powder Metallurgy, GKN Aerospace and GKN Automotive, reported an adjusted ... Read more »
Mesago Messe Frankfurt GmbH, the organiser of Formnext, the leading international event for Additive Manufacturing/3D printing, has confirmed that it will now be held solely as a virtual event. Named ‘Formnext Connect’ ... Read more »
Kolibri Metals GmbH, Amtzell, Germany, has launched the ATACAMA powder drying system, a machine which dries metal powder to a moisture content of less than 4% to increase the buildability of tool steels with carbon ... Read more »
Germany’s Institute for Production Management (IPM AG), the organiser of the 5th Additive Manufacturing Forum Berlin, which is scheduled to take place at the Estrel Congress & Messe Center, Berlin, Germany ... Read more »
Optomec, headquartered in Albuquerque, New Mexico, USA, has been awarded a $1 million contract by the US Air Force to deliver a high volume production metal Additive Manufacturing machine for refurbishing turbine ... Read more »
SmarTech Analysis, a market research and industry analysis firm based in Crozet, Virginia, USA, has published the sixth edition of its ‘Additive Manufacturing with Metal Powders’ report ... Read more »
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Dresden, Germany, reports that it has installed a new Fusion Factory Additive Manufacturing system from Xerion Berlin ... Read more »
Metal Additive Manufacturing technology developer Desktop Metal, Burlington, Massachusetts, USA, has announced that it will become a publicly listed company during the fourth quarter of 2020. The company has signed ... Read more »
The ExOne Company, North Huntingdon, Pennsylvania, USA, is to partner with Xometry, an on-demand manufacturing marketplace headquartered in Gaithersburg, Maryland, USA, to provide metal Binder Jetting (BJT) ... Read more »
The Manufacturing Technology Deployment Group Inc. (MTDG) located in Clearwater, Florida, USA, reports that its board of directors has appointed Dr Stephan Biller, PhD, as the CEO of the group’s new subsidiary ... Read more »
Optomec, headquartered in Albuquerque, New Mexico, USA, reports that over 10 million turbine blades have now been repaired using its metal Additive Manufacturing machines. The impressive figure ... Read more »
The ASTM International Additive Manufacturing Center of Excellence (ASTM AM CoE) will hold its fourth ASTM AM CoE Snapshot Virtual Workshop on September 11, 2020. The theme of the online one-day workshop ... Read more »
3Diligent, a digital manufacturing services provider headquartered in El Segundo, California, USA, reports that it has successfully concluded a closed beta round of its new ProdEX Connect and Shopsight ... Read more »
DMG Mori, headquartered in Bielefeld, Germany, has reported its financial results for the first half of 2020. The group is one of the largest producers of cutting machine tools globally, as well as a developer ... Read more »
America Makes, Youngstown, Ohio, USA, in conjunction with the US Air Force Research Laboratory and GE Research, has launched a new challenge, ‘The Open Source-Additive Scanning Implementation Strategy’ (OASIS) ... Read more »
The European Powder Metallurgy Association (EPMA) has announced that registration is now open for the Euro PM2020 Virtual Congress. The first online edition of the EPMA’s annual Powder Metallurgy Congress ... Read more »
Ipsen USA, Cherry Valley, Illinois, USA, reports that despite uncertain market conditions presented by the coronavirus (COVID-19) pandemic, the company has seen an increase in orders placed during ... Read more »
Researchers from the U.S. Department of Energy’s Oak Ridge National Laboratory (ORNL), Tennessee, USA, have designed and additively manufactured what they say is a first-of-its-kind aluminium device that ... Read more »
Cincinnati Incorporated (CI), a build-to-order machine tool manufacturer based in Harrison, Ohio, USA, has partnered with Multiax America, a custom designer of CNC machining centres, headquartered in Grandville, Michigan, USA ... Read more »
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University, Alabama, USA, plans to initiate a two-year project focused on improving commercial air travel through the use ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online