Freemelt Holding AB, Mölndal, Sweden, has elected Johannes Henrich Schleifenbaum, entrepreneur and professor, and co-founder Ulric Ljungblad as members of the company’s board. During an extraordinary ... Read more »
The RAPID (Reverse engineering, Advanced manufacturing, Prototyping, Innovation and Design) unit in the Ogden Air Logistics Complex, Hill Air Force Base, Utah, USA, is reported to be helping the US Air Force ... Read more »
Klaus Stöcker, Wermelskirchen, Germany, has purchased a further M1 surface smoothing machine from AM Solutions – 3D post processing technology, headquartered in Untermerzbach, Germany, a brand of ... Read more »
Sintavia, based in Hollywood, Florida, USA, has entered into a collaboration with Lockheed Martin, headquartered in Bethesda, Maryland, USA, in an effort to expand the use of metal Additive ... Read more »
Discounted early-bird registration is nearing its end for the Fraunhofer Direct Digital Manufacturing Conference DDMC 2023, scheduled to take place March 15-16, 2023, in Berlin. Those interested in early ... Read more »
3D Systems, Rock Hill, South Carolina, has announced that Dr Joe Zuiker will join the company as executive vice president, Engineering & Operations, effective December 12, 2022, while Dr Brent Stucker ... Read more »
Five Fraunhofer institutes – Research Institution for Additive Manufacturing Technologies IAPT, the Institute for Ceramic Technologies and Systems IKTS, the Institute for Toxicology and Experimental ... Read more »
Airflight, a startup aerospace company based in Brønderslev, Denmark, is working to develop multi-rotor aircraft, including large drone-based flying cranes. Following its participation in an Additive ... Read more »
Desktop Metal, Boston, Massachusetts, USA, has announced that it has now installed over 1,100 Additive Manufacturing machines worldwide. Of the installed machines, more than 80% are reported to be for the ... Read more »
ULT, Löbau, Germany, has introduced a unique solution for process gas cleaning in metal Additive Manufacturing. The AMF 200 is reported to be a modular system developed for the extraction and ... Read more »
Researchers from Waseda University, Japan, and Nanyang Technological University (NTU), Singapore, have developed a new Additive Manufacturing process for the production of metal-plastic composite ... Read more »
Solar Atmospheres of California, Fontana, California, USA, has announced that it is now approved by Honeywell to heat treat austenitic, martensitic, PH, and tool steels, as well as nickel, cobalt, titanium and ... Read more »
Following the introduction of its PB EBM 30S last year, the pro-beam Group, Gilching, Germany, has disclosed further information about the Electron Beam Powder Bed Fusion (PBF-EB) Additive ... Read more »
Fortius Metals, Inc, Lafayette, Colorado, USA, a spinout from Elementum 3D, has closed on a priced seed financing round with AM Ventures, the venture capitalist arm of the Langer Group. The $2 million round is ... Read more »
The IMDEA Materials Institute, one of the seven Madrid Institutes for Advanced Studies (IMDEA), has announced that the Alloys for Additive Manufacturing Symposium (AAMS) 2023 will take place ... Read more »
EPTAM Precision Solutions, headquartered in Northfield, New Hampshire, USA, has acquired a new sintering furnace to support its move into Metal Injection Moulding and metal Binder Jetting technology. ... Read more »
Sigma Additive Solutions, Santa Fe, New Mexico, USA, has joined the EOS Developer Network (EDN) by EOS GmbH, headquartered in Krailling, Germany. This move will enable Sigma to provide software and ... Read more »
MX3D, based in Amsterdam, the Netherlands, has announced the installation of ‘Entanglement,’ its first permanent work of art in a college building in Skidmore College, New York, USA. Together with artist ... Read more »
Hermeus, an aerospace company headquartered in Atlanta, Georgia, USA, has demonstrated turbojet to ramjet transition within its Chimera engine. The cost and speed at which the Hermeus team achieved this ... Read more »
Theta Technologies, Exeter, UK, has announced a collaboration with aerospace and defence manufacturers BAE Systems, London; AMRC North West, part of the University of Sheffield Advanced ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online