APWORKS GmbH has revealed that the recent record-breaking Bugatti Chiron was equipped with additively manufactured titanium exhaust finishers. The car is the first hyper sports car to break the 300 mph barrier (483 km/h), a world record that was set at the beginning of August in Germany. ... Read more »

Siemens has announced the official launch of the Siemens Additive Manufacturing (AM) Network at Formnext 2019, Frankfurt, Germany. The network is said to offer an advanced cloud-based solution to foster collaboration ... Read more »

BEAMIT is reported to have acquired a SLM 500 quad-laser system, their third SLM machine of the year, bringing their total to eight Additive Manufacturing units from SLM. The company is one of the largest ... Read more »

GE Additive has unveiled the Arcam PRS 30, a new automated powder recovery station said to offer a closed system to prevent powder exposure for operators working in industrial additive manufacturing environments.   ... Read more »

GE Additive Arcam has announced general release of development material (D-material) support for pure copper and highly-alloyed tool steel during 2020. Offered to all customers as a general release on both pure copper and tool steel ... Read more »

GE Additive has announced the launch of Arcam EBM Build Performance Analyser, a new suite of machine health data analytics. The software system will be released from December 2019 ... Read more »

Sintavia, LLC, has announced at this year’s Formnext that it is co-founding a trade group for additive manufacturers focused on promoting the environmental benefits of AM over traditional methods of manufacturing. ... Read more »

GE Additive unveiled the Concept Laser M2 Series 5 at Formnext 2019, Frankfurt Germany. The latest iteration of the popular M2 machine was said to meet the high expectations for part quality and consistency from customers, especially in the highly-regulated aerospace ... Read more »

GE Additive today unveiled the Arcam EBM SpectraTM L at Formnext 2019, Frankfurt Germany. The Spectra  L is reported to meet increased demand for higher productivity, especially from the aerospace industry, and offers customers a larger build volume ... Read more »

Sandvik and BEAMIT are showcasing their combined metal powder and Additive Manufacturing capabilities at Formnext 2019, taking place in Frankfurt, Germany, November 19–22. Earlier this year, Sandvik ... Read more »

Metal AM covers the latest news live from the show floor at Formnext 2019, the world’s biggest Additive Manufacturing trade show. Check back regularly for updates from Day 1, November 19, direct from Frankfurt ... Read more »

SLM Solutions Group AG, headquartered in Lübeck, Germany, and Divergent Technologies, Inc., Gardena, California, USA, have announced at Formnext 2019 a letter of intent that will see the deepening of their strategic partnership, ... Read more »

Desktop Metal, Burlington, Massachusetts, USA, has announced its new Shop System™, a metal Binder Jetting system designed for machine shops and metal job shops, at Formnext 2019, Frankfurt, Germany. ... Read more »

Following the launch of Farsoon’s FS301M metal Additive Manufacturing system last month, the company has announced the first installation of a dual-laser version of the machine at an un-named aerospace customer in the USA. ... Read more »

Unitedcoatings Group, headquartered in Rubbiano, Italy, has launched Lincotek Additive to provide a complete AM service as part of a wider initiative by the group, which is designed to consolidate a range ... Read more »

Metal Additive Manufacturing company Meltio, based in Linares, Spain, and Las Vegas, Nevada, USA, will debut its patented new technology at Formnext 2019, Frankfurt, Germany, November 19–22. Referred to as a ‘4D manufacturing’ ... Read more »

BEAMIT SpA, Fornovo di Taro, Italy, and Elementum 3D, Erie, Colorado, USA, have signed an agreement to promote each other’s expertise and develop the market for speciality materials in the EU. BEAMIT specialises ... Read more »

Link3D, Boulder, Colorado, USA, will deliver a fully-integrated Additive Manufacturing workflow using linked Autodesk software to enable end-to-end traceability. The company will unveil this new capability ... Read more »

Admatec Europe BV, Goirle, the Netherlands, has launched the Admaflex 300, which it states is the world’s first flexible and open system for high-volume metal and ceramic additively manufactured parts. The system will be showcased ... Read more »

SPEE3D, Melbourne, Australia, will launch its new SPEE3Dcell product at Formnext 2019 in Frankfurt, Germany, running from November 19–22, 2019. This new Additive Manufacturing cell will be demonstrated with the production of copper ... Read more »