Session 57: AM – Special Aspects in AM Powders

Role Of Metal Powder Characteristics In Additive Manufacturing
Thomas, M; Drawin, S (ONERA France)

Challenges Of Processing Magnesium And Magnesium Alloys By Selective Laser Melting
Gieseke, M; Murua Escobar, H; Kiesow, T; Wessarges, Y; Noelke, C; Kaierle, S (Laser Zentrum Hannover e.V. Germany) Maier, H J (Leibniz Universitaet Hannover Germany) Matena, J (University of Veterinary Medicine Hannover, Germany) Kampmann, A (Hannover Medical School Germany) Nolte, I (University of Veterinary Medicine Hannover, Germany) Gellrich, N C (Hannover Medical School Germany) Haferkamp, H (Leibniz Universitaet Hannover Germany)

Direct Metal Printing of Zinc; From Single Laser Tracks to High Density Parts
Lietaert, K; Baekelant, W (KU Leuven Belgium) Thijs, L (3D Systems Belgium) Vleugels, J (KU Leuven Belgium)

Design For Additive Manufacturing
Bromberger, M (Altair Engineering, Germany) Yancey, R (Altair Engineering, USA)

Session 58: AM – Properties of

High Performing Alloys Damage Mechanisms In Tensile And Creep Tested Additive Manufactured IN939
Brodin, H (Siemens Industrial Turbomachinery AB Sweden)

Microstructural Investigation Of Heat Treated Inconel 625 Fabricated Through Direct Metal Laser Sintering
Marchese, G (Politecnico di Torino Italy) Lorusso, M; Calignano, F; Ambrosio, E P; Manfredi, D; (Center for Space Human Robotics, Polito, Istituto Italiano di Tecnologia, Italy) Pavese, M; Biamino, S; Ugues, D; Fino, P (Politecnico di Torino Italy)

Characterization Of Hastelloy X Produced By Laser Powder Bed Additive Manufacturing
Saarimäki, J; Moverare, J (Linköping University Sweden) Brodin, H (Siemens Industrial Turbomachinery AB Sweden) Lundberg, M (Linköping University Sweden)

Influence Of Heat Treatment Condition On Properties Of 1.2709 Maraging Steel Fabricated By Selective Laser Melting
Lemke, J; Vedani, M; Casati, R (Politecnico di Milano Italy)

Poster

Crystallization And Mechanical Properties Of Laser Rapid Prototyping Zr-based Bulk Amorphous/ nanocrystalline Composites
Wu, H; Lan, X; Zai, X; Liu, Y (Central South University China)

Investigation Of The Fabrication Condition Of Copper And Copper Alloys By Selective Laser Melting
Sugitani, Y; Nishida, M (FUKUDA Metal Foil & Powder Co.,Ltd. Japan) Araki, M (Technology Research Association for Future Additive Manufacturing Japan) Kyogoku, H (Kinki University Japan)

Heat Resistant Aluminum Materials For Additive Manufacturing
Huo, S; Mais, B (Ecka Granules Germany GmbH Germany)

Session 64: AM – Special Aspects in AM Powders

Fused Filament Fabrication Of 316L Parts For The MIM Process
Burkhardt, C (OBE Ohnmacht and Baumgaertner Germany)

Properties For PIM Feedstocks Used In Fused Deposition Modelling
Kukla, C; Duretek, I; Schuschnigg, S; Gonzalez-Gutierrez, J; Holzer, C (Montanuniversitaet Leoben Austria)

Fused Deposition Modeling — Opportunities For Cheap Metal AM
Studnitzky, T; Kieback, B; Riecker, S; Quadbeck, P; Andersen, O (Fraunhofer IFAM Dresden Germany)

Induction Plasma Technology Applied To Powder Recycling
Vert, R; Pontone, R (Tekna France)

Session 65: AM – Properties of Stainless Steels

Additive Manufacturing Using Water Atomised Steel Powders
Hoeges, S (GKN Sinter Metals Engineering GmbH Germany) Zwiren, A; Schade, C (Hoeganaes Corporation United States)

Heat Treatment Optimization Of A High Nitrogen Stainless Steel Manufactured By Selective Laser Melting
Limousin, M (ENISE – Schneider Electric France) Colin, C (MINES ParisTech France) Bertrand, P (ENISE France) Van Belle, L (Plastic and Composites Technical Center France)

Influence Of HIP Post-Treatment On The Fatigue Strength Of 316L-Steel Produced By Selective Laser Melting (SLM)
Kunz, J; Kaletsch, A; Broeckmann, C (Institut für Werkstoffanwendungen im Maschinenbau, RWTH Aachen Germany)

Effect Of Hot Isostatic Pressing On Cellular Lattice Structures Obtained By Selective Laser Melting
Holovenko, Y; Kollo, L; Jõeleht, M; Pohlak, M; Veinthal, R (Tallinn University of Technology Estonia)

• Previous
• 3/3