EOS GmbH, headquartered in Krailling, Germany, has announced the addition of its EOS Aluminium AlSi10Mg to its Responsible Products portfolio. EOS Aluminium AlSi10Mg incorporates a minimum of 30% recycled ... Read more »
The University of Utah’s Department of Materials Science and Engineering and IperionX, based in Charlotte, North Carolina, USA, have celebrated the opening of an Additive Manufacturing research centre ... Read more »
AM 4 AM, a producer of advanced metal powders for Additive Manufacturing based in Foetz, Luxembourg, has announced further improvements in the mechanical properties of its HiperAL aluminium ... Read more »
Mantle Inc, San Francisco, California, USA, has announced the addition of 420 stainless steel to its Additive Manufacturing materials portfolio. Renowned for its high strength, hardness, corrosion resistance, and ability to be polished, 420 stainless steel will enable engineers and manufacturers to produce production-grade ... Read more »
Freemelt AB, based in Mölndal, Sweden, and the UK Atomic Energy Authority (UKAEA) have been collaborating since 2023 on the development of material processes for the Electron Beam Powder Bed Fusion ... Read more »
VDM Metals, located in Werdohl, Germany, has formed a partnership with Rosswag Engineering, a German metal Additive Manufacturing service provider based in Pfinztal. The aim is to expand the application ... Read more »
In a paper titled ‘Laser Powder Bed Fusion Processing of Low Cost CoCrFeNiMoxNby High Entropy Alloys with Promising High-Temperature Properties via In Situ Alloying Commercial Powders,’ authors S Venkatesh Kumaran ... Read more »
Linde Advanced Material Technologies Inc. and the National Aeronautics and Space Administration (NASA) have announced the licensing agreement for the GRX-810 Alloy Metal Powder. Under this agreement ... Read more »
GKN Hoeganaes has announced the launch of a new blog series focusing on metal powders. Aligned with the company’s interest in sustainability and materials development, the blog will explore metal powder ... Read more »
Sweden’s Höganäs AB has received a Partner of the Year award from the GTCC Division of Mitsubishi Heavy Industries (MHI), a leading global industrial group headquartered in Tokyo, Japan. Höganäs was recognised ... Read more »
Researchers at Nanyang Technological University and the National University of Singapore have published a paper investigating microstructure control in the metal Additive Manufacturing process ... Read more »
AddUp Inc, headquartered in Cébazat, France, has announced that 17-4 PH alloy can now be used with its FormUp 350 Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing machine. 17-4 PH can be certified ... Read more »
Researchers from ETH Zurich, Switzerland, and Aerosint, Herstal, Belgium, recently published a paper in Materials & Design focusing on the defect-free Additive Manufacturing of CuCrZr-316L steel multi-material structures ... Read more »
The Tantalum-Niobium International Study Center (TIC) is celebrating its 50th year as a trade association serving the tantalum and niobium industries. Over this time, leaders in these industries have met at the TIC ... Read more »
EnerAM – a group project between Atomising Systems Limited (ASL), Laser Additive Solutions (LAS), Nuclear Advanced Manufacturing Research Centre (NAMRC), Hybird Technologies ltd and Brunel University London ... Read more »
Fortius Metals, Lafayette, Colorado, USA, has been awarded an AFWERX Direct-to-Phase II SBIR contract in the amount of $1.25M focused on qualifying Fortius Metals IN625-RAM2 nickel-based superalloy wire for large-scale ... Read more »
A team of fifty undergraduate students on Purdue University’s Active Controls team have used Additive Manufacturing to advance vertical take-off and vertical-landing (VTVL) technology. The Purdue Space ... Read more »
A consortium of companies and research organisations is embarking on METAMET, a new project proposing a digital framework for the design ... Read more »
Replique GmbH, based in Mannheim, Germany, has announced the launch of Material Hub, a searchable online database of materials for Additive Manufacturing. Users can navigate the hub via numerous ... Read more »
The Metal Powder Industries Federation (MPIF) has announced that its PowderMet2024/AMPM2024 programme will include a four-session forum dedicated to carbides. The co-located events will take place ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
Join 40,000+ other AM professionals – follow us online