Alloyed purchases Arcast arc melter to expand in-house capabilities

June 25, 2021

The capabilities offered by the Arc 200 have enabled Alloyed to line up new alloys for the medical, jewellery, gas and space sectors (Courtesy Alloyed)

Alloyed, Oxford, UK, has acquired an Arc 200 melting furnace from Arcast Inc., Oxford, Maine, USA, and has installed it alongside the range of technologies already available within its Rapid Alloy Research Centre. This follows on from the company’s investment in an Electro-Thermal Mechanical Testing (ETMT) machine in 2020.

“Alloyed is an expert in the development, licensing, and manufacture of proprietary alloys, alloy powders, and alloy components for a growing number of industry sectors,” stated Gael Guetard, the director of Rapid Alloy Research Centre Director. “The acquisition of the Arc 200 from Arcast means that Alloyed is one of the only private commercial companies to have this technology in-house. It has been purchased to complement our two induction melters installed in 2020, these two melters having been key assets for our Cu, Ni, Pt, Fe, and Al alloy development projects.”

Guetard continued, “The induction melters use a ceramic crucible which reacts with some alloys and are limited to 2000°C, whereas the Arc 200 has a copper crucible that accommodates higher melting point alloys and means we can now produce alloys with high levels of Ti, Zr, Nb, Ta, Mo, W, etc. This significantly widens the markets and customers we can reach, particularly in the medical, space, and nuclear sectors.”

The Arc 200 uses a tungsten electrode to generate an arc in an argon atmosphere and melts the feedstock materials in a water-cooled copper crucible. The specific machine purchased by Alloyed also has the following options: high vacuum (10-5 mbar) and getter, allowing a clean melt; electromagnetic stirring/pulsing and button flipping, enabling the chemical homogeneity of the melt; high power (up to 800 A) to melt any metal; and tilt-casting into a mould, controlling the solidification structure and shape of the ingot.

“Before we purchased the Arc 200, we would outsource the melting of high temperature and reactive alloys, and this had the knock-on effect of increasing cost and lead times of our projects,” Guetard explained. “In addition, it meant that we had little control over quality. Bringing this capability in-house means that we can significantly increase the pace of our alloy development projects and gain more control over the quality of the alloys, which is fundamental to customer satisfaction.”

“The arc melter fits within our Rapid Alloy Research Centre, where the ingots cast in the Arc 200 can be processed, characterised and tested. We are currently in the commissioning phase, but we already have several exciting new alloys lined up: Ti-based alloys for medical applications, bulk metallic glasses for jewellery, high-entropy alloys for gas turbines, refractory-based alloys for space, and more. We are excited to engage with new customers moving forward who can now benefit from our expertise and agility in customised alloy development,” Guetard concluded.

www.alloyed.com

www.arcastinc.com

In the latest issue of Metal AM magazine

Download PDF
 

Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:

  • Metal powders in Additive Manufacturing: An exploration of sustainable production, usage and recycling
  • Inside Wayland Additive: How innovation in electron beam PBF is opening new markets for AM
  • An end-to-end production case study: Leveraging data-driven machine learning and autonomous process control in AM
  • Consolidation, competition, and the cost of certification: Insight from New York’s AM Strategies 2024
  • Scandium’s impact on the Additive Manufacturing of aluminium alloys
  • AM for medical implants: An analysis of the impact of powder reuse in Powder Bed Fusion

The world of metal AM to your inbox

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Sign up

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Looking for AM machines, metal powders or part manufacturing services?

Discover suppliers of these and more in our comprehensive advertisers’ index and buyer’s guide, available in the back of Metal AM magazine.

  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data
View online
Share via
Copy link
Powered by Social Snap