Falcontech highlights large-scale metal AM capabilities at Formnext 2026

Falcon Tech Co., Ltd. (Falcontech), headquartered in Wuxi, Jiangsu Province, China, is exhibiting at Formnext 2026, taking place November 17-20 in Frankfurt, Germany. The company is highlighting its large-scale metal Additive Manufacturing capabilities and applications in aerospace and thermal management.
Founded in 2012, Falcontech operates over 80 metal Additive Manufacturing machines, including equipment from EOS, Farsoon High-Tech and Bright Laser Technologies. The fleet includes five metre-scale machines with build sizes ranging from 1,000 to 1,500 mm.

The company manufactures titanium alloy door structural components for COMAC’s C919 commercial passenger aircraft, using Laser Beam Powder Bed Fusion (PBF-LB) technology. In 2015, Falcontech reportedly became the first in China to pass manufacturing conformity verification for PBF-LB titanium alloy parts under the C919 airworthiness certification programme.
According to Falcontech, the components achieve over 30% weight reduction by combining topology optimisation with an integrated, weld-free design, while also improving stiffness-to-weight ratio and fatigue resistance.
Falcontech also manufactures a water cooling manifold from TC4 titanium alloy using metal Additive Manufacturing. Measuring 53 × 23 × 255 mm, it features a single-inlet, multi-outlet configuration for centralised coolant distribution to multiple cooling blocks or chambers. The manifold integrates internal flow passages, supporting uniform flow distribution and low pressure drop while reducing potential leakage points at joints.

The company also produces a chip liquid-cooling plate from CuCrZr copper alloy using metal AM. Measuring 18 × 3 × 16 mm, it is designed for chip cooling in computers, communication devices and consumer electronics.
The internal channels are developed through coupled thermal-fluid topology optimisation, balancing flow resistance and temperature uniformity. Compared with a serpentine-channel design, Falcontech reports a 30% increase in channel area and a 20% improvement in cooling performance.
The company also develops and produces metal powders in-house and maintains a material and process database covering over 40 metal materials, including titanium alloys, nickel-based superalloys, aluminium alloys, stainless steels and copper alloys.
Falcontech is exhibiting at Formnext, Hall 12.0, Booth F137.





























