Stark Future orders multiple Farsoon FS4X metal AM machines for motorcycle production

Stark currently uses titanium Additive Manufacturing to produce footpegs (Courtesy Stark Future)
Stark currently uses titanium Additive Manufacturing to produce footpegs (Courtesy Stark Future)

Stark Future, an electric motorcycle manufacturer based in Barcelona, Spain, has ordered multiple FS4X metal Additive Manufacturing machines from Farsoon Technologies, headquartered in Changsha, China. The new machines will form part of a dedicated production line intended to support higher-volume manufacturing of motorcycle components.

The agreement will also see the companies jointly develop a complete manufacturing process, covering material and process parameter development, build preparation, heat treatment, finishing, quality inspection, part traceability and production validation. The companies aim to establish a qualified production line capable of meeting the quality, repeatability, productivity and cost requirements needed to replace conventional manufacturing methods for selected components.

The collaboration builds on a partnership established in 2024, when Stark Future adopted Farsoon’s large-format FS721M-H-8-CAMS machine for the series production of motorcycle components. Subsequent developments included the joint KLINGA project, which demonstrated repeatable, high-precision titanium series production across more than 1,000 parts.

Stark currently uses titanium Additive Manufacturing to produce footpegs (Courtesy Stark Future)
Stark currently uses titanium Additive Manufacturing to produce footpegs (Courtesy Stark Future)

“With metal 3D printing, Stark is able to build higher-performance vehicles,” stated Anton Wass, Founder and CEO of Stark Future. “3D printing gives us freedom of geometry in design, which minimises the use of material and helps us optimise flex, strength, fatigue and weight. In many cases, reducing weight by 50%.”

Farsoon FS4X technical capabilities

The newly announced FS4X is a Laser Beam Powder Bed Fusion (PBF-LB) machine developed for industrial series production and forms part of Farsoon’s Continuous Additive Manufacturing Solution (CAMS) portfolio. It offers a build envelope of 425 × 425 × 550 mm and is available with either four 2,000 W lasers or six 1,000 W lasers. Beam-shaping capabilities and an open platform enable users to develop material parameters and optimise processing strategies for specific applications.

Nuclear Fusion’s Manufacturing Challenge Where Metal Additive Manufacturing Can Make The Difference

To support process stability, the machine incorporates automated in-situ scanner calibration, multi-laser alignment, multi-layer gas flow, recirculating filtration and chamber pressure control. Additional features include a one-piece machined build cylinder, closed-loop Z-axis control, zero-point positioning and a low-drag recoater. A dedicated tool airlock allows recoater blade replacement without exposing the main processing chamber to ambient air.

Stark Future will purchase multiple FS4X metal Additive Manufacturing machines (Courtesy Farsoon)
Stark Future will purchase multiple FS4X metal Additive Manufacturing machines (Courtesy Farsoon)

The FS4X also supports automated guided vehicle (AGV) transfer of build cylinders under inert-gas protection, connecting the AM process with offline cooling and downstream handling. Automated job changes can enable production beyond staffed shifts, while Farsoon’s Powder Handling System (PHS) integrates powder recovery, sieving and conveying to reduce manual powder transfers.

According to Farsoon, these capabilities are intended to improve production consistency, reduce manual intervention and lower the cost per accepted part. The modular automation approach also allows manufacturers to expand production capacity as demand increases.

Oliver Huizhi Li, Managing Director of Farsoon Europe GmbH, stated: “This programme is driven by real series-production requirements.” He explained that the companies are developing the manufacturing process around the FS4X, from Additive Manufacturing and heat treatment through to finishing, inspection and production validation.

Farsoon Europe is showcasing the FS4X through a dedicated video highlighting the planned production line and its collaboration with Stark Future at Formnext 2026, taking place November 17–20 in Frankfurt, Germany (Hall 11.0, Booth E11).

www.starkfuture.com

www.farsoon-gl.com

GET THIS ISSUE:  PDF  |  VIEW ONLINE  |  BUYER’S GUIDE

TRUSTED CONTENT. TARGETED AUDIENCE

Advertise with Metal AM and access a global base of 50,000+ AM professionals.

Contact Jon Craxford: [email protected]

Request a Media Pack
  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data

Don’t miss a thing – register for our newsletter

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Register now

Join 40,000+ other AM professionals – follow us online

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap