Sinter-based metal Additive Manufacturing on show at World PM2024 in Yokohama
September 9, 2024
Taking place October 13-17 in Yokohama, Japan, the 2024 World Powder Metallurgy World Congress & Exhibition (World PM2024) provides an all-topic conference and international exhibition for the global Powder Metallurgy and related industries, including Metal Injection Moulding, metal Additive Manufacturing and Hot Isostatic Pressing.
Organised by the Japan Powder Metallurgy Association and Japan Society of Powder and Powder Metallurgy, the conference includes a number of sessions that will be of interest to our readers. These include both sinter-based and beam-based AM technologies.
Technical presentations on sinter-based technologies can be found in the following Special Interest Sessions and a General Sessions.
Special Interest Session 3: Promising Future of Sinter Based AM
- Special Invitation: Emergence of Several Sinter-Based AM Technologies
- Review of Sinter-Based Additive Manufacturing (SBAM) — Status and Prospects
- Additive Manufacturing of Tungsten Heavy Alloys — A Technology Assessment of Sinter-Based AM Processes
General Session: AM sinter-based technologies
- Optimisation of Stainless Steel 316 Powder and Printing Parameters to Enhance the Densification in Binder Jet 3D printing (BJT) Additive Manufacturing Process
- Effect of Powder Packing Rate on the Printing and Sintering Properties of Metal Binder Jet 3D Printing
- Development of the Binder Jetting technology for aeronautic applications : state of the art and focus on IN718 alloy
- Recycling of Ti-6Al-4V Powder in Metal Binder Jetting
- Successful Binder Jetting of Titanium Alloys Appeals to the Modification of Surface Oxides: A Plasma Treatment Approach
- Validation of Process Parameters for Binder Jetting of Gears (17-4PH)
- Binder Jetting of Gears – Investigation of the Tooth Bending Strength for Gears Made of 17-4PH Using Rotary Bending Specimens
- Metal-Binder-Jetting Specific Lattice Designs for Load-Bearing Applications
- Pressureless Mg Melt Infiltration into Ti Powder Preform with Various Flow Channel Structures toward the Application to Binder Jetting Additive Manufacturing
- Evaluation of Binder Jet 3D Printed (BJT)M2 Tool Steel against the Wrought M2, Powder Metallurgy (PM) M2 and Laser Powder Bed Fusion (LBPF) Maraging Steel for Mould Application
- Coldmetalfusion – Smooth Surfaces by Green Part Processing
- Digital Twin of the Binder Jetting Manufacturing Route from Powder to Component
- In situ Density Prediction in Metal Binder Jetting Using Powder Bed Imaging
- Aluminum Powder with Superior Sinterability under Non-Pressure Process
- Densification of Metal BJT Parts with Fine Grains Coated with Fine Powder
- Electrostatically Design of Composite Particles for Efficient Ceramics Sintering
- Effect of Shot Peening and Its Parameters on Surface Quality, Microstructure and Hardness of 316L Stainless Steel Fabricated by Material Extrusion Additive Manufacturing
- Evaluation and Optimization of Process Stability for Piston-Based Material Extrusion with MIM Feedstock
- Microstructure, Mechanical and Corrosion Properties of 17-4PH Stainless Steels Manufactured via Metal Material Extrusion Additive Manufacturing
- Microstructure and Mechanical Properties of M2 High-Speed Steel Fabricated by Fused Filament Fabrication
- Effect of B Addition on Density and Properties in 316L Stainless Steel Manufactured by Filament-Based Extrusion Additive Manufacturing
- Debinding, a Key Stage in the Manufacture of Inconel 718 Parts by MBJ
- Binder Jetting — Influence of Debinding Atmospheres on Sintering Anisotropy of 17-4 PH Stainless Steel
- Properties of Thermosetting Urethane Acrylate Binder for Metal Binder Jet Additive Manufacturing
- Optimization of Debinding and Sintering in Metal Freeforming with the ARBURG Freeformer by Variation of Process Parameters and Part Design
Full information on all sessions is available here.
Download Metal AM magazine
