Oerlikon to additively manufacture heat exchangers for Ariane 6 rocket launcher
ArianeGroup, headquartered in Issy-les-Moulineaux, near Paris, France, and Oerlikon AM, Pfäffikon, Switzerland, have signed an order worth up to ... Read more »
Metal Additive Manufacturing news
3D Print Congress & Exhibition Paris conference programme published
3D Print Congress & Exhibition Paris has released the programme for its October 11-12, 2023, event. This year’s show is expected to attract over 300 exhibitors and host over 6,000 attendees. ... Read more »
Stratasys rejects takeover as 3D Systems reaffirms commitment to its proposed deal
Stratasys, based in Minneapolis, USA, has announced that its Board of Directors, after careful review and consultation with its independent financial and legal advisors, has determined that the proposal ... Read more »
Fieldmade using NOMAD on-site Additive Manufacturing for spare and replacement parts during shipbuilding
Fieldmade, headquartered in Lillestrøm, Norway, is using Additive Manufacturing to produce large quantities of spare and replacement for use in the Johan Castberg, a floating production, storage and offloading ... Read more »
6K Additive partners with Z3DLab to produce titanium zirconium alloy powders for medical and aerospace
6K Additive, a division of 6K Inc., headquartered in North Andover, Massachusetts, USA, has announced a partnership with Z3DLab, located in Montmagny, Îl-de-France, France, for the production of its ZTi alloys ... Read more »
Trumpf presents additively manufactured titanium brake levers at Eurobike
Trumpf, Ditzingen, Germany, has collaborated with bicycle brake manufacturer Trickstuff to develop additively manufactured titanium brake levers for bicycles, showcasing the results at this year’s Eurobike trade show ... Read more »
Tritone collaborates with DSH to provide access to sintering furnaces
Tritone Technologies, Tel Aviv, Israel, has announced a collaboration with DSH Technologies, Cedar Grove, New Jersey, USA, in an effort to accelerate the adoption of Tritone’s MoldJet technology. Under the ... Read more »
HP’s novel coating that could enable the free sintering of BJT and MIM parts
Metal Binder Jetting (BJT) involves the selective application of a binder layer-by-layer on a powder bed to produce green parts, followed by debinding and sintering treatments. During the debinding and sintering ... Read more »
Zak Fang wins Humboldt Award for titanium powder development
Zhigang Zak Fang, Materials Sciences and Metallurgical Engineering Professor, University of Utah, USA, has been awarded the Humboldt Research Award for his work developing the Hydrogen Assisted ... Read more »
OWL achieves Aerospace Quality Management System EN9100 for HIP
OWL Additive Manufacturing GmbH, Aachen, Germany, has achieved Aerospace Quality Management System EN9100 (equivalent to AS9100) and maintained its ISO9001 status for its Hot Isostatic Pressing of metals. ... Read more »
Ford selects IperionX to supply titanium automotive components
IperionX Limited, Charlotte, North Carolina, USA, has announced it has agreed a Scope of Work to supply additively manufactured titanium components to Ford Motor ... Read more »
Uniformity Labs launches low-porosity UniJet SS17-4PH stainless steel for Desktop Metal Production System
Uniformity Labs, Fremont, California, USA, has announced the availability of its ultra-low porosity 17-4PH stainless steel powder jet UniJet™ SS17-4PH Performance for the ... Read more »
Titomic launches Mobile Repair Unit for in-field repairs
Additive Manufacturing company Titomic Limited, Brisbane, Australia, has introduced its Mobile Repair Unit. Housed within a 6 m container, the unit incorporates two Cold Spray ... Read more »
In the latest issue of Metal AM magazine
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
- From requirement to reality: How DEEP Manufacturing is scaling large-format metal AM
- From titanium scrap to AM powder: Inside 6K Additive’s UniMelt expansion
- Scaling metal AM for maritime spare parts: From legacy portfolios to on-demand supply
- Building trust in flight-critical metal AM: Inside the SAE AMS AM standards committee
- Incodema3D boosts metal AM productivity with HK Technologies’ VacuSift powder handling system
TRUSTED CONTENT. TARGETED AUDIENCE
Advertise with Metal AM and access a global base of 50,000+ AM professionals.
Contact Jon Craxford: [email protected]
| Request a Media Pack |
- AM machines
- Process monitoring & calibration
- Heat treatment & sintering
- HIP systems & services
- Pre- & post-processing technology
- Powders, powder production and analysis
- Part manufacturers
- Consulting, training & market data
Join 40,000+ other AM professionals – follow us online