AMUG selects Mark Wynn for President’s Award

EventsNews
April 5, 2023
The Additive Manufacturing Users Group bestowed its President’s Award to Mark Wynn (Courtesy AMUG)
The Additive Manufacturing Users Group bestowed its President’s Award to Mark Wynn (Courtesy AMUG)

At its 35th annual conference, the Additive Manufacturing Users Group (AMUG) bestowed its President’s Award to Mark Wynn, Senior Technical Specialist for Yazaki North America, Inc, headquartered in Canton, Michigan.

“Mark Wynn’s perseverance, dedication, passion, professionalism, and selflessness were apparent in each of the AMUG roles he filled. And the result of those qualities was excellence in his work,” stated Mark Abshire, AMUG President. “The measure of his leadership is the legacy he leaves behind. Mark has blazed a trail that guides present and future generations to succeed.”

He continued, “Mark’s professionalism imparted order, structure, and efficiency into the operations he oversaw. Moreover, he did so without making it about him. Instead, it was always about the team, about AMUG, and about those AMUG serves.”

Chanel: When manufacturing process becomes part of luxury value

Mark Wynn’s first AMUG Conference was in 1995; his AMUG volunteerism reaches back to 2000. He has served a variety of roles over the years, including AMUGexpo team lead, deputy vice president, AMUG Board of Directors member, and Expo Committee Chair. In 2015, Wynn received the DINO (Distinguished Innovator Operator) award from AMUG.

The President’s Award is intended to recognise the exemplary vision, leadership, and tireless years of service for the advancement of AMUG. Over its history, AMUG has presented only eleven President’s Awards.

“I am extremely honoured to have received the President’s Award,” Wynn stated. “I am also truly humbled by the recognition. There have only been ten previous recipients in AMUG’s history, and they are among the people I admire and respect the most in the additive manufacturing industry. Just to be mentioned in their company is truly amazing.”

Wynn added, “Everything I have done for AMUG has been a team effort. I have worked beside many incredible people: AMUG Board members, expo team members, the Red Oak team, and all the AMUG volunteers. I share this award with all of them. For all the years of hard work for AMUG, I have gotten back much more than I have given, and I am sincerely grateful for the experience.”

He concluded, “I would also like to thank Yazaki for all the support of AMUG. That support came from everyone from executive management to my management and to my awesome coworkers who covered the day-to-day workload when I was at the conference or planning for it.”

Bob Wood, AMUG Expo Committee Chair, concurred with Abshire, stating, “The 2023 AMUGexpo was by far the smoothest in terms of operations and logistics. And that is 100 percent due to what Mark Wynn had put into place in the prior years.”

Wood served on Wynn’s Expo Committee for four years and succeeded him as committee chair. In prior years, Wood was on the customer side of Wynn’s work. Wood stated, “Mark always worked hard and diligently to do the best job possible. And throughout his work, he showed a commitment to and care for both AMUG and its exhibitors.”

Mark Abshire concluded, “I’ve had the good fortune to work with Mark Wynn in two capacities — as a customer and teammate. In both, I witnessed a strong dedication to quality — his standards are higher than most — coupled with patience to find solutions that work for both parties. Bottom line, Mark Wynn is a pleasure to be around.”

Past recipients of the President’s Award are Thomas A Sorovetz (2000), Patti Brown (2006), Guy E Bourdeau (2007), Robert Zubrickie (2010), Timothy Gornet (2013), Gary Rabinovitz (2014), Mark Abshire (2016), Elizabeth Goode (2019), Terry Hoppe (2021), and Vince Anewenter (2021).

www.amug.com

GET THIS ISSUE:  PDF  |  VIEW ONLINE  |  BUYER’S GUIDE
EventsNews
April 5, 2023

TRUSTED CONTENT. TARGETED AUDIENCE

Advertise with Metal AM and access a global base of 50,000+ AM professionals.

Contact Jon Craxford: [email protected]

Request a Media Pack
  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data

Don’t miss a thing – register for our newsletter

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Register now

Join 40,000+ other AM professionals – follow us online

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap