Additive Manufacturing to feature prominently at Euro PM2014 Conference, Austria

July 21, 2014

July 21, 2014


The Euro PM2014 Conference and Exhibition, organised by European Powder Metallurgy Association (EPMA) will take place in Salzburg, Austria, 21-24 September 2014. This year’s event will include an increased focus on metal Additive Manufacturing with three dedicated technical sessions and a Special Interest Seminar on the subject.

As well as the inclusion of metal AM in the technical programme, the EPMA’s European Additive Manufacturing Group (EAMG) will host an open meeting during the event. The EAMG was launched in May 2013 is open to companies and organisations across the whole supply chain.

The sessions on metal Additive Manufacturing include the following presentations:

Additive Manufacturing: Applications & Materials

RFID Transponder Integration in Metal Surgical Instruments produced by Additive Manufacturing

Isaza P., J F; Wilbig, J; Aumund-Kopp, C; Petzoldt, F (Fraunhofer IFAM, Germany)

Innovations in Filtration through Additive Manufacturing

Burns, N; Burns, M; Travis, D; Geekie, L (Croft Additive Manufacturing Limited, United Kingdom)

Quality Control Measures Critical to the Adoption of Sustainable Additive Manufacturing Component Production

Ferrar, B (LPW Technology Ltd, United Kingdom)

New Powder for Additive Manufacturing

Emadinia, O; Machado, A C; Farinha, A R; Trindade, B; Vieira, M T (CEMUC-Group of Nanomaterials and Micro Manufacturing, Portugal)


Additive Manufacturing: Characterisation and Post Treatment

Effect of Subsequent Hot Isostatic Pressing on Mechanical Properties of ASTM F75 Alloy Produced by Selective Laser Melting

Broeckmann, C; Güthoff, T (IWM RWTH Aachen, Germany)

Adapted Heat Treatment of Selective Laser Melted Materials

Vrancken, B; Kempen, K (KU Leuven, Belgium); Thijs, L (LayerWise NV, Belgium); Kruth, J-P; Van Humbeeck, J (KU Leuven, Belgium)

Characterisation and Control of Powder Properties for Additive Manufacturing

Strondl, A (Swerea KIMAB AB, Sweden); Lyckfeldt, O (Swerea IVF AB, Sweden); Brodin, H (Siemens Industrial Turbomachinery AB, Sweden); Ackelid, U (Arcam AB, Sweden)

Functional Encapsulation of Laser Melted Inconel 718 by Arc-PVD and HVOF for Post Compacting by Hot Isostatic Pressing

Tillmann, W; Schaak, C (TU Dortmund, Germany); Schaper, M; Niendorf, T; Aydinöz, M E (University of Paderborn, Germany)

Additive Manufacturing: Technologies

The Pluses and Minuses of Additive Manufacturing

Lherbier, L (Carpenter Technology, USA); Novotnak, D (Carpenter Powder Products, USA); Fulcher, B (Harvest Technologies, USA)

Optimization of SLM Technology Main Parameters in the Production of Gold and Platinum Jewellery

Carlotto, A; Loggi, A; Zito, D; Sbornicchia, P; Maggian, D (Progold S.p.A., Italy); Molinari, A; Cristofolini, I (University of Trento, Italy)

Process Window for Electron Beam Melting of Ti-6Al-4V

Kirchner, A; Klöden, B; Luft, J; Weissgärber, T; Kieback, B (Fraunhofer Institute for Manufacturing Technology and Advanced  Materials IFAM, Germany)

3D Multi-Material Metal Printing of Delicate Structures

Riecker, S; Studnitzky, T; Andersen, O; Kieback, B (Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Germany)

Special Interest Seminar on Progress in Additive Manufacturing

3D Printing: A Bridge to Unlimited Innovation

Prof Olaf Diegel (Lunds University, Sweden)

Where are the Various Additive Manufacturing Technologies Now Available Taking Jewellery Manufacturing and Design Industry in the  21st Century

Frank Cooper (JIIC Birmingham, UK)

Additive Manufacture of Metallic Materials for Extreme Environments

Prof Iain Todd (University of Sheffield, UK)

Advanced registration deadline

The advanced registration deadline for the Euro PM2014 conference is July 31, 2014. 

Subscribe to our FREE e-newsletter

Your email address:

Useful links:  News | Articles | Introduction to metal Additive Manufacturing

In the latest issue of Metal AM magazine

Download PDF

Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:

  • Metal powders in Additive Manufacturing: An exploration of sustainable production, usage and recycling
  • Inside Wayland Additive: How innovation in electron beam PBF is opening new markets for AM
  • An end-to-end production case study: Leveraging data-driven machine learning and autonomous process control in AM
  • Consolidation, competition, and the cost of certification: Insight from New York’s AM Strategies 2024
  • Scandium’s impact on the Additive Manufacturing of aluminium alloys
  • AM for medical implants: An analysis of the impact of powder reuse in Powder Bed Fusion

The world of metal AM to your inbox

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Sign up

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Looking for AM machines, metal powders or part manufacturing services?

Discover suppliers of these and more in our comprehensive advertisers’ index and buyer’s guide, available in the back of Metal AM magazine.

  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data
View online
Share via
Copy link
Powered by Social Snap