Zak Fang wins Humboldt Award for titanium powder development

Zak Fang has been awarded the Humboldt Research Award for his work developing the Hydrogen Assisted Metallothermic Reduction process (Courtesy The University of Utah)

Zhigang Zak Fang, Materials Sciences and Metallurgical Engineering Professor, University of Utah, USA, has been awarded the Humboldt Research Award for his work developing the Hydrogen Assisted Metallothermic Reduction (HAMR) process. This technology can produce high-quality, low-carbon emitting titanium powder at a reduced cost.

The HAMR process is based on recent developments about the effects of hydrogen on the stability of Ti solid solutions with high oxygen content (up to 14wt%.) Fang discovered that the bond between titanium and oxygen can be destabilised by inserting hydrogen atoms into the Titanium(II) oxide (Ti-O) solid solution lattices, leading to the completely new approach for sustainably producing low oxygen titanium with minimum energy and cost.

“Titanium metal is difficult to produce because of its strong affinity to oxygen,” stated Fang. “By dramatically reducing the cost and carbon dioxide emissions of producing titanium powder, the HAMR process has the potential to fundamentally disrupt and transform the global titanium metal industry.”

Today, the US imports almost 100% of the titanium sponge it consumes each year. These imports are both produced inefficiently and often sourced from areas that face some levels of geopolitical instability, thus threatening supply chains. The current market-standard process for creating titanium metal heats titanium ore to 982° Celsius and reacts with chlorine gas and petroleum coke to produce titanium tetrachloride. This is then purified, reduced by molten magnesium in an argon atmosphere for up to four days, and vacuum-distilled into the porous, brittle form of titanium known as sponge. Finally, it is crushed and melted to make ingots and other titanium mill deliverables that are sent to the manufacturers of titanium products.

Zak Fang (right) and Pei Sun, research associate in the Powder Metallurgy Research Lab (left) describe the process to reduce commercial titanium dioxide into the final pure titanium powder (Courtesy The University of Utah)
Zak Fang (right) and Pei Sun, research associate in the Powder Metallurgy Research Lab (left) describe the process to reduce commercial titanium dioxide into the final pure titanium powder (Courtesy The University of Utah)

Fang’s research, which led to the HAMR technology, is expected to improve energy efficiency drastically. The HAMR process can produce primary titanium metal from either minerals or from titanium scrap. Recycling titanium scrap is an endeavour that IperionX is also currently undertaking. Producing low-oxygen spherical titanium powder from scrap is accomplished by utilising HAMR in combination with a patented Granulation, Sintering, and Deoxygenation (GSD) process. The result is that high-oxygen titanium scrap is transformed into low-oxygen titanium powders that meet or exceed stringent aerospace and biomedical industry standards.

Titanium powder can be used for Additive Manufacturing or in Powder Metallurgy to manufacture products in a broad range of demanding applications, including aerospace, defence, biomedical, and other civilian applications with increased sustainability.

The Humboldt Prize

Every year, the Alexander von Humboldt Foundation grants up to 100 Humboldt Research Awards to internationally leading researchers of all disciplines from abroad in recognition of their academic record to date.

Named after the late Prussian naturalist and explorer Alexander von Humboldt, the Humboldt Prize offers a cash prize of €60,000 annually to internationally renowned scientists and scholars.

Z Zak Fang is a globally recognised innovator in the areas of cemented tungsten carbide, refractory metals, titanium, Powder Metallurgy, and metal hydride for hydrogen and thermal energy storage. Prior to joining the University of Utah, Fang had a decade-long career in industrial R&D. He has authored or co-authored over 180 peer reviewed publications. He is the named sole or co-inventor in over sixty issued US patents. He founded/co-founded two start-up companies and successfully commercialised several tungsten carbide and titanium technologies.

As well as the Humboldt, Fang is a Fellow of the National Academy of Inventors, ASM, and APMI, respectively. In 2009 he was the winner of an R&D100 Award.

www.Utah.edu

www.humboldt-foundation.de

GET THIS ISSUE:  PDF  |  VIEW ONLINE  |  BUYER’S GUIDE

TRUSTED CONTENT. TARGETED AUDIENCE

Advertise with Metal AM and access a global base of 50,000+ AM professionals.

Contact Jon Craxford: [email protected]

Request a Media Pack
  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data

Don’t miss a thing – register for our newsletter

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Register now

Join 40,000+ other AM professionals – follow us online

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap