Metal Additive Manufacturing, Vol. 3 No. 3 Autumn 2017

Prefer a PDF download? Click here

In addition to over 75 pages of the latest industry news, this 128 page issue of Metal Additive Manufacturing magazine includes the following exclusive features:

Honeywell: Driving AM application and supply chain development in the aerospace industry

Over the past decade Honeywell has been a leader in accelerating the adoption of metal Additive Manufacturing in the aerospace industry. With dedicated facilities in five countries, the company is at the forefront of the development of new commercial aerospace applications and the supply chain needed to implement series production.

Dr Dhruv Bhate, Associate Professor in the Polytechnic School at Arizona State University, visited Honeywell’s Phoenix facility on behalf of Metal AM magazine and met with Donald Godfrey, an Engineering Fellow at Honeywell and the person most credited with initiating and directing the company’s progress in the field of metal AM.

View online | Download single page PDF | Download double page PDF

RapidTech + FabCon 3D: Innovations in binder-based AM and advances in conformal cooling

From June 20-22, 2017, the German city of Erfurt became a centre of gravity for Additive Manufacturing, hosting the annual RapidTech technical conference and its accompanying trade exhibition, FabCon 3D.

Dr Georg Schlieper visited the event for Metal Additive Manufacturing magazine and highlights a number of innovative trends in metal Additive Manufacturing process technology and applications, including the latest binder-based Additive Manufacturing technologies and innovations in toolmaking.

View online | Download single page PDF | Download double page PDF

Design for Additive Manufacturing: Increasing part value through intelligent optimisation

Paying the right amount of attention to Design for Additive Manufacturing (DfAM) can make the difference between economic success and failure. When considering Additive Manufacturing for production applications, it is important to consider designing, or redesigning, parts that would otherwise be produced using conventional manufacturing.

In this case study, Terry Wohlers and Professor Olaf Diegel, both of Wohlers Associates, reveal how industrial mining machine manufacturer Atlas Copco has used DfAM to increase the value of a hydraulic manifold.

View online | Download single page PDF | Download double page PDF

Design for Additive Manufacturing: Transforming RF antennas through intelligent optimisation

Additive Manufacturing presents the opportunity to completely rethink a product’s design, transforming its functionality and reducing manufacturing complexity. With the right application and the right approach, the results really can live up to industry buzzwords such as ‘disruptive’ and ‘transformational’.

In the following article, Optisys LLC reveals how, through intelligent design optimisation, the company has used Additive Manufacturing to develop the next generation of RF antenna systems for aerospace and defence.

View online | Download single page PDF | Download double page PDF

AMPM2017: Understanding the impact of powder reuse in metal Additive Manufacturing

An issue of significant current interest to the AM world, which can potentially impact both the quality and cost-effectiveness of built parts, is whether there is a limit on the number of times that metal powders can be cycled around an AM process.

In this article, Dr David Whittaker reviews three presentations on the topic from AMPM2017, the fourth annual Additive Manufacturing with Powder Metallurgy Conference, held in Las Vegas, USA, June 13-15, 2017.

View online | Download single page PDF | Download double page PDF

< Back to 2017 archive

Metal AM magazine Summer 2022

In the latest issue of Metal AM magazine

Download PDF
 

Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:

  • Transforming access to medical implants with PrinterPrezz
  • Lessons from 2021’s Olympic bike crash
  • Xerox liquid metal AM
  • Additive Manufacturing for oil, gas and maritime
  • Multi-material metal parts by Powder Bed Fusion
  • Findings from Wohlers Report 2022
  • The challenge of grain size: X-ray powder diffraction analysis of parts made by metal AM

The world of metal AM to your inbox

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Sign up

News from the industry…

    News from the industry…

    Discover our magazine archive…

    The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

    • Reports on visits to leading metal AM part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news

    All past issues are available to download as free PDFs or view in your browser.

    Browse the archive

    Share via
    Copy link
    Powered by Social Snap